Optimization of energy costs in the pretreatment of olive mill wastewaters by electrocoagulation
- 1 April 2012
- journal article
- research article
- Published by Taylor & Francis in Environmental Technology
- Vol. 33 (7) , 801-807
Abstract
In this study, the electrocoagulation process was evaluated as a pretreatment process for olive mill wastewaters. Aluminium (Al) and iron (Fe) electrodes, several contact times and 0.5, 1 and 2 A currents were used to compare chemical oxygen demand (COD) removal efficiencies for each case. The optimum contact time and current were 45 minutes and 1 A, respectively, which resulted in a COD removal of 58.7% with an Al electrode. Experimental data from distinct operational conditions were used to fit a model for COD removal efficiencies. Energy consumption was also predicted. Under optimum operational conditions, the treatment cost was approximately €0.13 kg−1 CODremoved and €4.41 m−3. The results showed that the electrocoagulation process was a cost-effective method for the pretreatment of olive mill wastewaters.Keywords
This publication has 41 references indexed in Scilit:
- Pre-treatment studies on olive oil mill effluent using physicochemical, Fenton and Fenton-like oxidations processesJournal of Hazardous Materials, 2010
- Evaluation of Olive Cake for Bio-OilEnergy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2009
- Comparison of classical chemical and electrochemical processes for treating rose processing wastewaterJournal of Hazardous Materials, 2007
- Olive oil mill wastewater valorisation by fungiJournal of Chemical Technology & Biotechnology, 2006
- Electro-coagulation of reactive textile dyes and textile wastewaterChemical Engineering and Processing - Process Intensification, 2005
- Decolourization and removal of phenolic compounds from olive mill wastewater by electrocoagulationChemical Engineering and Processing - Process Intensification, 2004
- Electrochemical technologies in wastewater treatmentSeparation and Purification Technology, 2004
- Olive oil mill wastewater treatment by means of electro-coagulationSeparation and Purification Technology, 2004
- Electrocoagulation (EC) — science and applicationsJournal of Hazardous Materials, 2001
- Biomass production and detoxification of wastewaters from the olive oil industry by strains of Penicillium isolated from wastewater disposal pondsBioresource Technology, 2000