Pathway to achieving circular InAs quantum dots directly on (100) InP and to tuning their emission wavelengths toward 1.55 μm
Authors:
- 24 July 2015
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 33 (5)
Abstract
Circular InAs quantum dots spontaneously form on InP surfaces in a solid-source molecular-beam epitaxy system during cooling of a planar InAs layer that is grown at an elevated temperature. Reflection high-energy electron diffraction indicates a transition from a two-dimensional to a three-dimensional surface at a substrate temperature near 500 °C under dimer arsenic overpressure. Atomic-force microscopy measures dot densities that can be varied between 10 and 45 μm−2, with an average dot radius of 29.8 ± 2.2 nm and an average dot height of 15.3 ± 0.5 nm; both are remarkably insensitive to the InAs-layer growth conditions and have narrow distributions relative to those of quantum dots that are spontaneously formed with other growth techniques. The importance of arsenic-for-phosphorus exchange reactions in the two-step dot-formation process is evident from the average dot volume per unit area that, under most growth conditions, is considerably larger than that of the deposited InAs. Thermodynamic analysis indicates that arsenic can kinetically replace phosphorus or phosphorus can replace arsenic under different growth conditions. Effects of phosphorus-for-arsenic exchange reactions are also evident in macroscopic room-temperature photoluminescence of single-layer-capped and double-layer-capped samples; the former samples emit in the 1800–1900-nm band, whereas the latter samples emit between 1550 and 1650 nm. Group-V exchange reactions are also manifest in the deliberate suppression of photoluminescence emission corresponding to the wetting layer.Keywords
This publication has 20 references indexed in Scilit:
- Low-Density InAs Quantum Dots Grown on InP(001) Using Solid-Source Molecular Beam Epitaxy with a Post-Growth Annealing ProcessJapanese Journal of Applied Physics, 2010
- Self Assembled InAs/InP Quantum Dots for Telecom Applications in the 1.55 µm Wavelength Range: Wavelength Tuning, Stacking, Polarization Control, and LasingJapanese Journal of Applied Physics, 2006
- Efficient Single-Photon Sources Based on Low-Density Quantum Dots in Photonic-Crystal NanocavitiesPhysical Review Letters, 2006
- Role of group V exchange on the shape and size of InAs/InP self-assembled nanostructuresJournal of Applied Physics, 2002
- In situ measurements of As/P exchange during InAs/InP(0 0 1) quantum wires growthApplied Surface Science, 2001
- Chemical beam epitaxy growth of self-assembled InAs/InP quantum dotsJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2001
- Formation of quantum wires and dots on InP(001) by As/P exchangeJournal of Applied Physics, 2001
- Height dispersion control of InAs/InP quantum dots emitting at 1.55 μmApplied Physics Letters, 2001
- Quantum dot heterostructures: Fabrication, properties, lasers (Review)Semiconductors, 1998
- The strain energy density of cubic epitaxial layersJournal of Crystal Growth, 1996