The use of PEEK nanorod arrays for the fabrication of nanoporous surfaces under high temperature: SiNx example
- 29 June 2012
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 4 (18) , 5608-5613
Abstract
Large area silicon nitride (SiNx) nanoporous surfaces are fabricated using poly(ether-ether-ketone) (PEEK) nanorod arrays as a template. The procedure involves manipulation of nanoporous anodic aluminum oxide (AAO) templates in order to form an ordered array of PEEK nanopillars with high temperature resistant characteristics. In this context, self-ordered AAO templates are infiltrated with PEEK melts via the “precursor film” method. Once the melts have been crystallized in the porous structure of AAO, the basis alumina layer is removed, yielding an ordered array of PEEK nanopillars. The resulting structure is a high temperature and chemical resistant polymeric nanomold, which can be utilized in the synthesis of nanoporous materials under aggressive conditions. Such conditions are high temperatures (up to 320 °C), vacuum, or extreme pH. For example, SiNx nanopore arrays have been grown by plasma enhanced chemical vapor deposition at 300 °C, which can be of interest as mold for nanoimprint lithography, due to its hardness and low surface energy. The SiNx nanopore array portrays the same characteristics as the original AAO template: 120 nm diameter pores and an interpore distance of 430 nm. Furthermore, the aspect ratio of the SiNx nanopores can be tuned by selecting an AAO template with appropriate conditions. The use of PEEK as a nanotemplate extends the applicability of polymeric nanopatterns into a temperature regime up to now not accessible and opens up the simple fabrication of novel nanoporous inorganic surfaces.Keywords
This publication has 26 references indexed in Scilit:
- Large-scale fabrication of single crystalline tin nanowire arraysNanoscale, 2010
- Cellular interactions of biodegradable nanorod arrays prepared by nondestructive extraction from nanoporous aluminaJournal of Materials Chemistry, 2010
- Regular arrays of highly ordered ferroelectric polymer nanostructures for non-volatile low-voltage memoriesNature Materials, 2008
- High‐Density 40 nm Diameter Sb‐Rich Bi2–xSbxTe3 Nanowire ArraysAdvanced Materials, 2003
- Direct Electrodeposition of Highly Dense 50 nm Bi2Te3-ySey Nanowire ArraysNano Letters, 2003
- Electrodeposition of Bi1-xSbxFilms and 200-nm Wire Arrays from a Nonaqueous SolventChemistry of Materials, 2003
- Patterned Magnetic Recording MediaAnnual Review of Materials Research, 2001
- Electrodeposition of Ordered Bi2Te3 Nanowire ArraysJournal of the American Chemical Society, 2001
- Three-dimensional control of light in a two-dimensional photonic crystal slabNature, 2000
- Nanomaterials: A Membrane-Based Synthetic ApproachScience, 1994