Comparison of Laboratory Methodologies to Evaluate Corrosion Inhibitors for Oil and Gas Pipelines
Authors:
- 1 October 2003
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 59 (10) , 897-912
Abstract
Experiments were carried out using a loop in three fields (gassy-oil, oily-gas, and oil-transmission pipes) under 17 operating conditions, using six inhibitors (three continuous and three batch). Laboratory experiments were carried out under field conditions using the same inhibitors at the same concentrations. Four types of data were used to compare the laboratory and field results: general corrosion rates, pitting corrosion rates, percentage inhibition calculated from general corrosion rates, and percentage inhibition calculated from pitting corrosion rates. Based on the comparison, the following laboratory methodologies were ranked: wheel test, bubble test, static test, rotating disc electrode (RDE), rotating cylinder electrode (RCE), jet impingement (JI), and rotating cage (RC).Keywords
This publication has 43 references indexed in Scilit:
- Standardized Methodology for Inhibitor Evaluation and Qualification for Pipeline Applications2000
- Corrosion of a Rotating Iron Disk in Laminar, Transition, and Fully Developed Turbulent FlowJournal of the Electrochemical Society, 1986
- Corrosion of Steel in Concentrated Sulfuric AcidJournal of the Electrochemical Society, 1978
- Mass transfer in turbulent pipe flow measured by the electrochemical methodInternational Journal of Heat and Mass Transfer, 1977
- Characterization of the Impingement Region in an Axisymmetric Turbulent JetIndustrial & Engineering Chemistry Fundamentals, 1977
- Mass Transfer in Axisymmetric Turbulent Impinging JetsIndustrial & Engineering Chemistry Fundamentals, 1977
- Mass transfer from crystalline surfaces in a turbulent impinging jet part I. Transfer by erosionThe Canadian Journal of Chemical Engineering, 1975
- Mass transfer in a nonuniform impinging jet: Part I. Stagnation flow‐velocity and pressure distributionAIChE Journal, 1970
- Solid-liquid mass transfer in turbulent pipe flowChemical Engineering Science, 1965
- Mass Transfer (Absorption) Coefficients Prediction from Data on Heat Transfer and Fluid FrictionIndustrial & Engineering Chemistry, 1934