Scuffing Performance of Amorphous Carbon During Dry-Sliding Contact
Authors:
- 1 January 2001
- journal article
- research article
- Published by Taylor & Francis in Tribology Transactions
- Vol. 44 (4) , 591-596
Abstract
Scuffing is a major problem that limits the life and reliability of sliding tribo-components. When scuffing occurs, friction force rises sharply and is accompanied by an increase in noise and vibration; severe wear and plastic deformation also occur on the damaged surface. Attempts have been made over the years to combat scuffing by enhancing the surface properties of the machine elements, and by methods involving lubricant formulation and coating application. In this study, the authors evaluated the scuffing performance of an amorphous, near-frictionless carbon (NFC) coating that provides super-low friction under dry sliding conditions. The test configuration used a ball-on-flat contact in reciprocating sliding. The coating was deposited on HI3 steel. An uncoated 52100 steel ball was tested against various coated flats in room air. Compared to uncoated surfaces, the carbon coating increased the scuffing resistance of the sliding surfaces by two orders of magnitude. Microscopic analysis shows that scuffing occurred on coaled surfaces only if the coating had been completely removed. It appears that depending on coating type, the authors observed that coating failure occurs before scuffing failure by one of two distinct mechanisms: the coating failed in a brittle manner and by spoiling, or by gradual wear.Keywords
This publication has 10 references indexed in Scilit:
- Friction and wear performance of diamond-like carbon films grown in various source gas plasmasSurface and Coatings Technology, 1999
- Effect of source gas and deposition method on friction and wear performance of diamondlike carbon filmsSurface and Coatings Technology, 1997
- Tribological Properties of Hard Carbon Films on Zirconia CeramicsTribology Transactions, 1996
- A tribological investigation of the graphite-to-diamond-like behavior of amorphous carbon films ion beam deposited on ceramic substratesSurface and Coatings Technology, 1991
- Friction-Induced Thermal Influences in Elastic Contact Between Spherical AsperitiesJournal of Tribology, 1989
- Estimation of the Molecular Junction Temperatures in Four-Ball Contacts by Chemical Reaction Rate StudiesA S L E Transactions, 1978
- Surface finish and damage in slidingProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1974
- A comparison of adsorption and boundary lubricant failureProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1974
- Failure by collapse of hydrodynamic oil filmsWear, 1972
- Thermoelastic instabilities in the sliding of conforming solidsProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1969