Effects of Thermal Demagnetization in Air on the Microstructure and Organic Contamination of NdFeB Magnets
Open Access
- 13 November 2024
- Vol. 17 (22) , 5528
Abstract
Demagnetization is an essential step for the demounting and safe handling of end-of-life NdFeB. Thermal demagnetization in air is a straightforward option to demount adhesive-fixed or segmented magnets. However, this process is suspected to increase the uptake of contaminants like O, C and Zn from coatings and adhesives, potentially degrading the recyclate quality. This study tests the effects of thermal demagnetization in air at 400 °C for 15 to 240 min on variously coated samples with different initial oxidation levels. Furthermore, the possible reversal of the contaminant uptake is explored. Samples with low previous oxidation levels showed significant uptake in oxygen with a minimal diffusion depth, while the uptake depended on the used coating. The best protectiveness was achieved with NiCuNi with an increase in oxygen of only around 30%. Epoxy (up to ~130% O uptake) and Zn coatings (up to ~80% O uptake) disintegrated during the treatment and offered less protection but still made a difference compared to uncoated samples (up to ~220% O uptake). Samples with high initial oxidation levels show no clear tendency towards further oxygen uptake and the carbon uptake is generally low, likely due to contemporary epoxy coatings featuring a passivation underneath as a barrier layer. Zn infiltration, which carried organic debris, was observed. Short demagnetization times proved to be favorable for limiting the depth of the diffusing contaminants. Mechanical coating removal after thermal demagnetization in air can mitigate the contaminant uptake, producing clean, recyclable end-of-life material.Keywords
Funding Information
- European Commission under Horizon Europe (101058598, 20090)
- EIT RawMaterials (101058598, 20090)
This publication has 23 references indexed in Scilit:
- An overview of Hydrogen assisted (Direct) recycling of Rare earth permanent magnetsJournal of Magnetism and Magnetic Materials, 2023
- Influence of heating rate and atmospheric conditions on the thermal response of CFRP and its constituentsResults in Materials, 2023
- The influence of chemical impurities on the properties of heavy rare-earth metals (Tb, Dy, Ho): Experimental and theoretical approachesMaterialia, 2021
- The extraction of NdFeB magnets from automotive scrap rotors using hydrogenJournal of Cleaner Production, 2020
- Relating atomic local structures and Curie temperature of NdFeB permanent magnets: an X‐ray absorption spectroscopic studyRare Metals, 2017
- REE Recovery from End-of-Life NdFeB Permanent Magnet Scrap: A Critical ReviewJournal of Sustainable Metallurgy, 2016
- The use of hydrogen to separate and recycle neodymium–iron–boron-type magnets from electronic wasteJournal of Cleaner Production, 2015
- Recycling of rare earths: a critical reviewJournal of Cleaner Production, 2013
- Multiple recycling of NdFeB-type sintered magnetsJournal of Alloys and Compounds, 2009
- Temperature dependence of magnetic properties of Nd-Fe-B magnetsJournal of Magnetism and Magnetic Materials, 1986