Experimental probe into the femtosecond laser ablation thresholds in carbon fiber reinforced polymer and assessment of the measurement theories
Authors:
- 13 June 2023
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 44 (8) , 5232-5246
Abstract
Focusing on the femtosecond laser processing of carbon fiber reinforced polymer (CFRP), the ablation threshold is of great concern to fulfill the manufacturing of specified functional surfaces and devices. The ablation thresholds and incubation coefficients of resin matrix and carbon fiber in CFRP subject to femtosecond laser irradiation are investigated from the measurement theories of ablation area diameter and ablation rate. The ablation thresholds of resin matrix and carbon fiber at different laser line scanning speeds are quantitatively determined by the ablation area diameter. Moreover, the impacts of laser scanning speeds, laser scanning directions, and polarization types on the ablation thresholds and incubation effect of resin matrix and carbon fiber in CFRP are revealed in depth, which indicates the ablation thresholds depend on the condition of femtosecond laser processing. In other words, choosing the appropriate combination of laser scanning and polarization would achieve the goal of efficient removal of resin matrix and carbon fiber in CFRP. After assessment of the measurement theories, it is found the one from ablation area diameter is more accurate than that from ablation rate, which is because of the difficulty in correctly measuring the ablation depth with ripples formed on the laser ablated surface.Keywords
Funding Information
- National Natural Science Foundation of China (U2037205)
This publication has 39 references indexed in Scilit:
- Experimental study on the CO2 laser cutting of carbon fiber reinforced plastic compositeComposites Part A: Applied Science and Manufacturing, 2012
- Minimum Damage in CFRP Laser ProcessingPhysics Procedia, 2011
- Carbon fiber reinforced plastics in aircraft constructionMaterials Science and Engineering: A, 2005
- The effect of damage accumulation behaviour on ablation thresholds and damage morphology in ultrafast laser micro-machining of common metals in airApplied Surface Science, 2004
- Models for Laser Ablation of PolymersChemical Reviews, 2003
- Ultrashort-pulse laser ablation of indium phosphide in airApplied Physics A, 2001
- Laser drilling of liquid crystal polymer compositePolymer Composites, 1998
- Fluence-dependent transmission of polyimide at 248 nm under laser ablation conditionsApplied Physics Letters, 1991
- Laser-induced damage on single-crystal metal surfacesJournal of the Optical Society of America B, 1988
- Simple technique for measurements of pulsed Gaussian-beam spot sizesOptics Letters, 1982