Organic–inorganic hybrid flame retardant: preparation, characterization and application in EVA
- 31 March 2014
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 4 (34) , 17812-17821
Abstract
A novel organic–inorganic hybrid flame retardant (DOPA–ATH), which was prepared via reacting dibenzo[c,e][1,2]oxaphosphinic acid (DOPA) with aluminum trihydroxide (ATH), was incorporated in ethylene-vinyl acetate copolymer (EVA) to improve its flame retardance. The structure, morphology and thermal stability of the hybrid flame retardant were characterized by Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The results suggested that DOPA was grafted onto ATH successfully, therefore resulting in higher thermostability than ATH. The flame retardance and burning behaviour of EVA with DOPA–ATH were also studied using limiting oxygen index (LOI), Underwriter laboratory 94 vertical burning test (UL-94 V) and cone calorimeter test (CCT). Results of UL-94 tests and LOI tests showed that the flame retardance of EVA/DOPA–ATH was better than EVA/ATH binary and EVA/DOPA/ATH ternary flame-retardant composites. The data obtained from the CCT showed that the peak heat release rate (PHRR) of EVA with the addition of 50 wt% DOPA–ATH was reduced by about 25% comparing with EVA with equivalent ATH. Total heat release (THR) and total smoke production (TSP) were reduced remarkably as well. The thermogravimetric analysis (TGA) data showed that the thermal stability of EVA/DOPA–ATH was improved with increased initial decomposition temperature and char residue. SEM observations of cryogenically fractured and tension fractured surfaces showed that EVA/DOPA–ATH had better interfacial interaction comparing with those of EVA/ATH and EVA/DOPA/ATH, which resulted in better elongation at break and tensile strength.Keywords
This publication has 32 references indexed in Scilit:
- The effectiveness of magnesium carbonate‐based flame retardants for poly(ethylene‐co‐vinyl acetate) and poly(ethylene‐co‐ethyl acrylate)Fire and Materials, 2007
- Brominated flame retardants: cause for concern?Environmental Health Perspectives, 2004
- FT-IR and FT-Raman study of selected pyridinephosphonocarboxylic acidsVibrational Spectroscopy, 2003
- Mechanical properties of Mg(OH)2/polypropylene composites modified by functionalized polypropyleneJournal of Applied Polymer Science, 2003
- Compatibilization of polyethylene/aluminum hydroxide (PE/ATH) and polyethylene/magnesium hydroxide (PE/MH) composites with functionalized polyethylenesPolymer, 2003
- Physical and mechanical properties of Al(OH)3/polypropylene composites modified by in situ‐functionalized polypropyleneJournal of Applied Polymer Science, 2002
- The effect of flame retardants on the flammability and mechanical properties of paper-sludge/phenolic compositePolymer Testing, 2000
- Effects of particle size of Al(OH)3 on electrical properties of EPDM compoundsPolymer Engineering & Science, 2000
- Polyolefin-Based Composites by Polymerization-Filling TechniqueJournal of Macromolecular Science, Part C: Polymer Reviews, 1998
- Recent Developments in the Flammability of Elastomeric MaterialsRubber Chemistry and Technology, 1986