Competition Between Transverse And Axial Hydraulic Fractures In Horizontal Wells
- 4 February 2013
- conference paper
- Published by Society of Petroleum Engineers (SPE)
Abstract
Most horizontal wells in unconventional reservoirs are drilled in the direction of the minimum stress. The preferred far-field fracture orientation thus favors hydraulic fractures transverse to the wellbore. The near-wellbore stress concentration, however, sometimes favors the initiation of fractures in a plane defined by the well axis. Transverse and axial hydraulic fractures can thus both initiate in some situations and cause significant near-wellbore tortuosity. We investigate the competition between these two types of fractures by comparing their energy requirement during hydraulic fracture initiation and propagation. First, we investigate the limiting cases of slow and fast pressurization where fluid flow and fracture mechanics uncouple. We then use recently developed numerical models for the initiation and propagation of hydraulic fractures from an open hole accounting for fluid flow in the newly created crack, wellbore stress concentration and injection system compressibility. Compared to a simple tensile stress analysis, the methodology described here provides a way to quantify the occurrence of only transverse or both transverse and axial hydraulic fractures as well as the maximum length of the axial fractures in the latter case. Based on dimensional analysis and numerical simulations for a range of relevant formation properties and far-field stress conditions, our results show that the critical defect length that favors transverse fracture over longitudinal is less than a borehole radius in the slow pressurization limit. For realistic injection conditions, if the initial defect length favors axial fractures, the distance over which transverse fractures become energetically favorable can become much larger than its slow pressurization value, especially for large dimensionless viscosity. Smaller pressurization rate and less viscous fluid ultimately favor the propagation of transverse fractures compared to axial ones.Keywords
This publication has 22 references indexed in Scilit:
- A fixed grid algorithm for simulating the propagation of a shallow hydraulic fracture with a fluid lagInternational Journal for Numerical and Analytical Methods in Geomechanics, 2011
- Plane-strain propagation of a fluid-driven fracture during injection and shut-in: Asymptotics of large toughnessEngineering Fracture Mechanics, 2006
- Propagation Regimes of Fluid-Driven Fractures in Impermeable RocksInternational Journal of Geomechanics, 2004
- Hydraulic fracture initiation and propagation: roles of wellbore trajectory, perforation and stress regimesJournal of Petroleum Science and Engineering, 2000
- Impact of Perforations on Hydraulic Fracture TortuositySPE Production & Facilities, 1999
- An analysis of the influence of the pressurization rate on the borehole breakdown pressureInternational Journal of Solids and Structures, 1997
- Engineering Formulas for Fractures Emanating From Cylindrical and Spherical HolesJournal of Applied Mechanics, 1984
- Circumferential Edge Crack in a Cylindrical CavityJournal of Applied Mechanics, 1977
- Some remarks on elastic crack-tip stress fieldsInternational Journal of Solids and Structures, 1972
- Interaction between an edge dislocation and a circular inclusionJournal of the Mechanics and Physics of Solids, 1964