Geometric Parameters Influencing Flow in an Axisymmetric IC Engine Inlet Port Assembly: Part II—Parametric Variation of Valve Geometry
Authors:
- 6 June 2000
- journal article
- Published by ASME International in Journal of Fluids Engineering
- Vol. 122 (4) , 658-665
Abstract
The influence of inlet valve geometry on IC engine port flow characteristics was investigated systematically by varying the key valve geometric parameters of fillet radius, cone angle, and seat angle. The analysis of flow through the port was measured for 36 valves having geometries determined by R/D=0.20-0.30, cone angle 0–20 deg and seat angle 30–45 deg. Discharge coefficients were measured to gain an understanding of the general flow performance. These were used in conjunction with heat transfer data to gain a clear understanding of the state of the boundary layer on the valve and port seats for varying lifts and pressure drops. This established the presence or otherwise of the four flow regimes within the valve passage. The results demonstrate that the cone and seat angle have major effects on valve flow performance and enable engine designers to choose more readily the valve characteristics they desire. [S0098-2202(00)00404-1]Keywords
This publication has 6 references indexed in Scilit:
- Flow separation in the inlet valve gap of piston enginesProgress in Energy and Combustion Science, 1998
- Measurement and Multidimensional Prediction of Flow in a Axisymmetric Port/Valve AssemblySAE International Journal of Advances and Current Practices in Mobility, 1987
- Techniques Used in Achieving a High Specific Airflow for High-Output, Medium-Speed Diesel EnginesJournal of Engineering for Power, 1967
- Poppet Inlet Valve Characteristics and Their Influence on the Induction ProcessProceedings of the Institution of Mechanical Engineers, 1963
- AIR FLOW Through Intake ValvesSAE International Journal of Advances and Current Practices in Mobility, 1942
- The Pressure Drop Through Poppet ValvesTransactions of the American Society of Mechanical Engineers, 1906