E-Shaped Folded-Patch Antenna With Multiple Tuning Parameters for On-Metal UHF RFID Tag
- 9 October 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 67 (1) , 56-64
Abstract
A semi-flexible E-shaped folded-patch with a compact footprint of 30 mm × 30 mm × 3 mm (0.091λ × 0.091λ × 0.0091λ at 912 MHz) is proposed for designing a miniature UHF tag for on-metal applications. The proposed tag antenna is simple in structure and it has 8 design parameters to achieve different levels of tuning. By changing the parameters, coarse- and fine-tunings can be easily performed to vary the tag’s resonant frequency. In spite of its compactness, the proposed tag antenna is able to provide sufficient resistance and inductive reactance to enable conjugate match with the chip. Due to conjugate match, the proposed tag antenna has achieved a power transmission coefficient of ~1 and a maximum read distance of 14.5 m (with 4W EIRP) on metal even it is electrically small. It has a radiation efficiency of 53%.Keywords
Funding Information
- Targeted CREST Fund through the Collaborative Research in Engineering, Science and Technology, Malaysia (T07C2-15)
This publication has 26 references indexed in Scilit:
- Small On-Metal UHF RFID Transponder With Long Read RangeIEEE Transactions on Antennas and Propagation, 2016
- Graphene-Based Dipole Antenna for a UHF RFID TagIEEE Transactions on Antennas and Propagation, 2016
- A Novel Broadband Antenna Design for UHF RFID Tags on Metallic Surface EnvironmentsIEEE Antennas and Wireless Propagation Letters, 2016
- Gain Enhancement of Ground Radiation Antenna for RFID Tag Mounted on Metallic PlaneIEEE Transactions on Antennas and Propagation, 2016
- A Novel Metal-Mountable Electrically Small Antenna for RFID Tag Applications With Practical Guidelines for the Antenna DesignIEEE Transactions on Antennas and Propagation, 2014
- Artificial magnetic conductor loaded long‐range passive RFID tag antenna mountable on metallic objectsElectronics Letters, 2014
- Small and Flexible Metal Mountable Passive UHF RFID Tag on High-Dielectric Polymer-Ceramic Composite SubstrateIEEE Antennas and Wireless Propagation Letters, 2012
- UHF RFID tag antenna using two PIFAs embedded in metallic objectsElectronics Letters, 2008
- Antenna design for UHF RFID tags: a review and a practical applicationIEEE Transactions on Antennas and Propagation, 2005
- Design of Planar Rectangular Microelectronic InductorsIEEE Transactions on Parts, Hybrids, and Packaging, 1974