Comparison of corrosion resistance for laser wire-feed vacuum additive manufactured and wrought Ti6Al4V alloy
Authors:
- 2 October 2025
- journal article
- Published by Emerald Publishing in Rapid Prototyping Journal
- Vol. 32 (1) , 270-280
Abstract
Purpose: This study aims to compare and study the differences in corrosion resistance and microstructure for a Ti6Al4V sample fabricated by wire-feed laser vacuum additive manufacturing (AM) and the wrought Ti6Al4V alloy. Design/methodology/approach: An electrochemical corrosion test in 3.5 Wt.% NaCl water solution was used to study the corrosion behavior. The microstructure of each specimen was characterized by X-ray diffraction and scanning electron microscopy with electron backscatter diffraction. The passive film composition was analyzed using X-ray photoelectron spectroscopy. Findings: The AM sample had inferior corrosion resistance as compared to the wrought alloy. The reason was because of the passive film formed on the wrought sample containing more TiO2, which was conducive to improving corrosion resistance. In addition, there was formation of acicular α′ phases and less β phase as well as a larger fraction of high-angle grain boundaries in the AM sample, and it led to inferior corrosion resistance compared to the wrought alloy. Originality/value: To the best of the authors’ knowledge, this paper is the first time to conduct a comparative study on the difference of corrosion resistance and microstructure for the Ti6Al4V sample fabricated by wire-feed laser vacuum AM and the wrought Ti6Al4V alloy. In addition, the underlying reason was fully explained.Keywords
Funding Information
- : Science and Technology Research Program of Chongqing Municipal Education Commission (KJQN202301128)
- Major Simultaneous Implementation Projects of Chongqing University of Technology (2024TBZ021))
This publication has 32 references indexed in Scilit:
- Corrosion and passivation behavior of laser powder bed fusion produced Ti-6Al-4V in static/dynamic NaCl solutions with different concentrationsCorrosion Science, 2021
- Melt pool size control through multiple closed-loop modalities in laser-wire directed energy deposition of Ti-6Al-4VAdditive Manufacturing, 2020
- Corrosion behavior of additively manufactured Ti-6Al-4V parts and the effect of post annealingAdditive Manufacturing, 2019
- Electrochemical behaviour of passive film formed on the surface of Ti-6Al-4V alloys fabricated by electron beam meltingCorrosion Science, 2018
- The anisotropic corrosion behaviour of wire arc additive manufactured Ti-6Al-4V alloy in 3.5% NaCl solutionCorrosion Science, 2018
- Corrosion behavior of selective laser melted Ti-6Al-4 V alloy in NaCl solutionCorrosion Science, 2016
- Perspectives on Titanium Science and TechnologyActa Materialia, 2013
- Effects of grain size on the corrosion resistance of wrought magnesium alloys containing neodymiumCorrosion Science, 2012
- Repassivation of titanium and surface oxide film regenerated in simulated bioliquidJournal of Biomedical Materials Research, 1998
- X-ray and UV photoemission studies of mono-, bi- and multilayers of physisorbed molecules: O2 and N2 on graphiteSurface Science, 1993