Influence of Electrode Material and Geometry on Hollow Cathode Discharges
Authors:
- Marco Martínez FuentesMFMarco Martínez Fuentes
- Julio Cruz CárdenasJCJulio Cruz Cárdenas
- Angélica Garzón-FontechaAGAngélica Garzón-Fontecha
- Roberto Sanginés de CastroRCRoberto Sanginés de Castro
- Carlos Ramos-VilchisCRCarlos Ramos-Vilchis
- Ivan CampsICIvan Camps
- Stephen MuhlSMStephen Muhl
Preprint
- 14 September 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
The term hollow cathode is used to describe almost any cathode with a cavity-like geometry, either cylindrical or spherical, as long as the plasma is confined within the conductive walls. For certain combinations of gas pressure (p) and hollow cathode diameter (D), the negative glow almost completely occupies the interior volume of the electrode, resulting in a very high-density plasma. This work reports the influence of geometry and electrode material, aluminium, copper, and graphite, as well as the spatial distribution profiles of the optical emission. Our findings indicated that the “commonly named” high-density hollow cathode discharge existed in the range of p.D from 0.3 to 0.9 Torr‧cm for the three cathode materials. Additionally, discharge voltage and current were measured as a function of gas pressure and cathode diameter, allowing us to determine the voltage when the discharge started, Von, and the gradient, n, of Log(I) vs. Log(V) graphs. Von decreased for larger values of p.D, indicating that at higher working pressures, a lower voltage was required to generate the high-density discharge. The spatial distribution profiles of Ar I spectral lines at 811.5 nm and 750.3 nm were analysed at p·D = 1.6 Torr·cm, showing significant differences among the three cathodes.Keywords
This publication has 28 references indexed in Scilit:
- Planar hollow cathode sputtering with asymmetrical voltage supplyVacuum, 2022
- Modeling plasmas in analytical chemistry—an example of cross-fertilizationAnalytical and Bioanalytical Chemistry, 2020
- The use of hollow cathodes in deposition processes: A critical reviewThin Solid Films, 2015
- The LXCat project: Electron scattering cross sections and swarm parameters for low temperature plasma modelingChemical Physics, 2012
- Influence of the target composition on the discharge voltage during magnetron sputteringSurface and Coatings Technology, 2006
- Discharge voltage measurements during magnetron sputteringSurface and Coatings Technology, 2006
- Hybrid model for a cylindrical hollow cathode glow discharge and comparison with experimentsSpectrochimica Acta Part B: Atomic Spectroscopy, 2002
- Comparison of calculated and measured optical emission intensities in a direct current argon–copper glow dischargeSpectrochimica Acta Part B: Atomic Spectroscopy, 2000
- Experimental determination of the energy distribution of ions bombarding the cathode surface in a glow dischargeSpectrochimica Acta Part B: Atomic Spectroscopy, 1995
- Monte Carlo simulation of an analytical glow discharge: motion of electrons, ions and fast neutrals in the cathode dark spaceSpectrochimica Acta Part B: Atomic Spectroscopy, 1995