A new family of optical systems employing φ-polynomial surfaces
Open Access
- 21 October 2011
- journal article
- Published by Optica Publishing Group in Optics Express
- Vol. 19 (22) , 21919-21928
Abstract
Unobscured optical systems have been in production since the 1960s. In each case, the unobscured system is an intrinsically rotationally symmetric optical system with an offset aperture stop, a biased input field, or both. This paper presents a new family of truly nonsymmetric optical systems that exploit a new fabrication degree of freedom enabled by the introduction of slow-servos to diamond machining; surfaces whose departure from a sphere varies both radially and azimuthally in the aperture. The benefit of this surface representation is demonstrated by designing a compact, long wave infrared (LWIR) reflective imager using nodal aberration theory. The resulting optical system operates at F/1.9 with a thirty millimeter pupil and a ten degree diagonal full field of view representing an order of magnitude increase in both speed and field area coverage when compared to the same design form with only conic mirror surfaces.Keywords
This publication has 8 references indexed in Scilit:
- Separation of the effects of astigmatic figure error from misalignments using Nodal Aberration Theory (NAT)Optics Express, 2010
- Real-ray-based method for locating individual surface aberration field centers in imaging optical systems without rotational symmetryJournal of the Optical Society of America A, 2009
- The misalignment induced aberrations of TMA telescopesOptics Express, 2008
- Optimal local shape description for rotationally non-symmetric optical surface design and analysisOptics Express, 2008
- Transformation of Zernike coefficients: scaled, translated, and rotated wavefronts with circular and elliptical pupilsJournal of the Optical Society of America A, 2007
- Description of the third-order optical aberrations of near-circular pupil optical systems without symmetryJournal of the Optical Society of America A, 2005
- Configuration of an off-axis three-mirror system focused on compactness and brightnessApplied Optics, 2005
- Influence Of Alignment Errors Of A Telescope System On Its Aberration Field1980