Solution Processed PVB/Mica Flake Coatings for the Encapsulation of Organic Solar Cells
Authors:
- Iftikhar Ahmed ChannaIftikhar Ahmed Channa
- Ali Dad ChandioAli Dad Chandio
- Muhammad RizwanMRMuhammad Rizwan
- Aqeel Ahmed ShahASAqeel Ahmed Shah
- Jahanzeb BhattiJBJahanzeb Bhatti
- Abdul Karim ShahASAbdul Karim Shah
- Fayaz HussainFHFayaz Hussain
- Muhammad Ali SharMuhammad Ali Shar
- Abdulaziz AlHazaaAbdulaziz AlHazaa
Open Access
Abstract
Organic photovoltaics (OPVs) die due to their interactions with environmental gases, i.e., moisture and oxygen, the latter being the most dangerous, especially under illumination, due to the fact that most of the active layers used in OPVs are extremely sensitive to oxygen. In this work we demonstrate solution-based effective barrier coatings based on composite of poly(vinyl butyral) (PVB) and mica flakes for the protection of poly (3-hexylthiophene) (P3HT)-based organic solar cells (OSCs) against photobleaching under illumination conditions. In the first step we developed a protective layer with cost effective and environmentally friendly methods and optimized its properties in terms of transparency, barrier improvement factor, and bendability. The developed protective layer maintained a high transparency in the visible region and improved oxygen and moisture barrier quality by the factor of ~7. The resultant protective layers showed ultra-flexibility, as no significant degradation in protective characteristics were observed after 10 K bending cycles. In the second step, a PVB/mica composite layer was applied on top of the P3HT film and subjected to photo-degradation. The P3HT films coated with PVB/mica composite showed improved stability under constant light irradiation and exhibited a loss of <20% of the initial optical density over the period of 150 h. Finally, optimized barrier layers were used as encapsulation for organic solar cell (OSC) devices. The lifetime results confirmed that the stability of the OSCs was extended from few hours to over 240 h in a sun test (65 °C, ambient RH%) which corresponds to an enhanced lifetime by a factor of 9 compared to devices encapsulated with pristine PVB.Keywords
This publication has 43 references indexed in Scilit:
- Thin Film Encapsulation of Organic Solar Cells by Direct Deposition of Polysilazanes from SolutionAdvanced Energy Materials, 2019
- Encapsulation of Organic and Perovskite Solar Cells: A ReviewCoatings, 2019
- Automatized analysis of IR‐images of photovoltaic modules and its use for quality control of solar cellsEnergy Science & Engineering, 2016
- Water Ingress in Encapsulated Inverted Organic Solar Cells: Correlating Infrared Imaging and Photovoltaic PerformanceAdvanced Energy Materials, 2015
- Effects of Temperature and Humidity on the Barrier Properties of Biaxially-oriented Polypropylene and Polyvinyl Alcohol FilmsJournal of Applied Packaging Research, 2014
- Materials and methods for encapsulation of OPV: A reviewRenewable and Sustainable Energy Reviews, 2013
- Solution processed encapsulation for organic photovoltaicsSolar Energy Materials and Solar Cells, 2013
- Reversible and irreversible degradation of organic solar cell performance by oxygenSolar Energy, 2011
- Influence of oxygen on semi-transparent organic solar cells with gas permeable electrodesOrganic Electronics, 2009
- The impact of water vapor transmission rate on the lifetime of flexible polymer solar cellsApplied Physics Letters, 2008