Pressure-Driven Piezoelectric Sensors and Energy Harvesting in Biaxially Oriented Polyethylene Terephthalate Film
Open Access
Abstract
This study reports the possibility of using biaxially oriented polyethylene terephthalate (BOPET) plastic packaging to convert mechanical energy into electrical energy. Electricity is generated due to the piezoelectricity of BOPET. Electricity generation depends on the mechanical deformation of the processing aids (inorganic crystals), which were found and identified by SEM and EDAX analyses as SiO2. BOPET, as an electron source, was assembled and tested as an energy conversion and self-powered mechanical stimuli sensor using potential applications in wearable electronics. When a pressure pulse after pendulum impact with a maximum stress of 926 kPa and an impact velocity of 2.1 m/s was applied, a voltage of 60 V was generated with short-circuit current and charge densities of 15 μAcm−2 and 138 nCm−2, respectively. Due to the orientation and stress-induced crystallization of polymer chains, BOPET films acquire very good mechanical properties, which are not lost during their primary usage as packaging materials and are beneficial for the durability of the sensors. The signals detected using BOPET sensors derived from pendulum impact and sieve analyses were also harvested for up to 80 cycles and up to 40 s with short-circuit voltages of 107 V and 95 V, respectively. In addition to their low price, the advantage of sensors made from BOPET plastic packaging waste lies in their chemical resistance and stability under exposure to oxygen, ultraviolet light, and moisture.Keywords
Funding Information
- the Ministry of Education, Youth, and Sports of the Czech Republic within the framework of DKRVO (RP/CPS/2022/007, RP/CPS/2022/003)
This publication has 37 references indexed in Scilit:
- A coupled piezo-triboelectric nanogenerator based on the electrification of biaxially oriented polyethylene terephthalate food packaging filmsNano Energy, 2023
- Development of high-sensitive piezoelectric nanogenerators of all-organic PVDF multilayer nanofibrous membrane with innovative 3D structure via electrohydrodynamic processesJournal of Polymer Research, 2023
- Optimization of piezoelectric polymer composites and 3D printing parameters for flexible tactile sensorsAdditive Manufacturing, 2023
- Multi-deformable piezoelectric energy nano-generator with high conversion efficiency for subtle body movementsNano Energy, 2022
- BaTiO3@PVDF-TrFE nanocomposites with efficient orientation prepared via phase separation nano-coating method for piezoelectric performance improvement and application to 3D-PENGChemical Engineering Journal, 2022
- Massive enhancement in power output of BoPET-paper triboelectric nanogenerator using 2D-hexagonal boron nitride nanosheetsNano Energy, 2021
- Harnessing energy from suspension systems of oceanic vehicles with high-performance piezoelectric generatorsEnergy, 2021
- Triboelectric and Piezoelectric Nanogenerators for Future Soft Robots and MachinesiScience, 2020
- A preliminary study on the highway piezoelectric power supply systemInternational Journal of Pavement Research and Technology, 2018
- Rigid amorphous fraction in poly(ethylene terephthalate) determined by dilatometryJournal of Thermal Analysis and Calorimetry, 2008