Traceable calibrations of Rogowski coils at high AC currents
Author:
- 24 November 2015
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Instrumentation & Measurement Magazine
- Vol. 18 (6) , 12-17
Abstract
What is now commonly known as the Rogowski coil was first presented in 1887 by A.P. Chattock as a winding that was evenly placed on a flexible solid piece of India rubber with a constant cross-section [1]. It was intended for the measurement of magnetic potential, and thus called magnetic potentiometer, but it was recognized from the start that the voltage at its output could be used to measure time-varying current when the winding forms a closed loop around a current-carrying conductor. In his succinct paper, A. P. Chattock covered apparently everything that was necessary: the theory of operation, a method of precision manufacturing by means of a lathe, and calibration by means of mechanically switched dc currents, long before the power electronics evolved and evaluated its measurement error which was about 1%. However, the widespread name of this device, Rogowski coil, became associated with W. Rogowski who co-authored a widely cited paper on the same device some twenty-five years later [2]. The Chattock-Rogowski coil can be described as a conductive helical coil wound on a non-magnetic core encompassing the (primary) conductor carrying the current that is to be measured, as Fig. 1 shows. The coil output (secondary) is usually voltage, but it can also be current, in which case it is an air-core counterpart of the magnetic-core current transformer. For over one century after its inception, the essence of the Chattock-Rogowski coil remained the same but the technology of its manufacturing, the materials used, and the number of its applications have expanded tremendously [3]. The Chattock- Rogowski coil is a very versatile device used primarily for the measurement of ac steady-state, impulse [4], transient [5], and pulsed [6] currents. The currents that can be measured range from a milliampere to over 10 MA, and operating frequencies range from fractions of a hertz to over a gigahertz. They are used extensively in the electric power industry by electric utilities and electrical equipment manufacturers for switchgear, metering, and protective relaying [7] in substations, on-site calibrations of current transformers [8], and measurements for hydropower plant efficiency testing [9]. They are also used in the steel industry for monitoring and control of electric arc furnaces, in the automotive industry for monitoring and control of current in resistance welding, in military applications, and in testing, calibration, and research laboratories, e.g., for measuring plasma currents in nuclear fusion research and measuring beam currents in particle accelerators.Keywords
This publication has 15 references indexed in Scilit:
- Calibrations of Resistance Welding Equipment With High Pulsed CurrentsIEEE Transactions on Instrumentation and Measurement, 2015
- Hydro energy generation and instrumentation & measurement: hydropower plant efficiency testingIEEE Instrumentation & Measurement Magazine, 2014
- Critical Parameters for Mutual Inductance Between Rogowski Coil and Primary ConductorIEEE Transactions on Instrumentation and Measurement, 2010
- Calibration of Rogowski Coils at Frequencies up to 10 kHz Using Digital SamplingIEEE Transactions on Instrumentation and Measurement, 2010
- Onsite Calibration of a Current Transformer Using a Rogowski CoilIEEE Transactions on Instrumentation and Measurement, 2008
- The effect of electrostatic screening of Rogowski coils designed for wide-bandwidth current measurement in power electronic applications2004
- Machinable Rogowski coil, design, and calibrationIEEE Transactions on Instrumentation and Measurement, 1996
- Using Rogowski coils for transient current measurementsEngineering Science & Education Journal, 1993
- Die Messung der magnetischen SpannungElectrical Engineering, 1912
- On a Magnetic PotentiometerProceedings of the Physical Society of London, 1887