Flame‐retardant, thermal and mechanical properties of PLA /ramie fiber composites
Authors:
- 25 April 2022
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 43 (7) , 4244-4254
Abstract
Although the natural fiber composites are preferable for sustainable and green product due to the environmental friendliness, they suffer from the high flammability. In this study, the flame retardant ramie fiber reinforced poly(lactic acid) composites were prepared and the synergistic barrier effect of aluminum diethylphosphinate, melamine cyanurate and silica was investigated. When the mass ratio of each flame retardant was 10%, the composites reached UL‐94 V0 rating with the limiting oxygen index of 30.1%. The excellent flame retardancy was resulted from the formation of high‐quality char layers, the chain reaction of free radicals as well as the dilute effect of inert gases generated during the combustion process. Besides, the cone calorimeter test showed that the peak heat release rate and total heat release decreased by 22.5% and 15.0%, respectively. Importantly, the flame retardants did not deteriorate the mechanical properties, thanks to the fiber reinforcement and high‐adhesion work between the flame retardants and the matrix which was demonstrated by the contact angle test.Keywords
Funding Information
- Boeing
- National Natural Science Foundation of China
This publication has 48 references indexed in Scilit:
- Dynamic behavior and flame retardancy of HDPE/hemp short fiber composites: Effect of coupling agent and fiber loadingComposite Structures, 2014
- Thermal and flame retardant properties of novel intumescent flame retardant polypropylene compositesJournal of Thermal Analysis and Calorimetry, 2012
- Preparation and Characterization of Flame-Retardant Aluminum Hypophosphite/Poly(Vinyl Alcohol) CompositeIndustrial & Engineering Chemistry Research, 2012
- Flame-Retardant, Thermal, Mechanical and Dielectric Properties of Structural Non-Halogenated Epoxy Resin CompositesPolymer-Plastics Technology and Engineering, 2012
- Investigation on effects of aluminum and magnesium hypophosphites on flame retardancy and thermal degradation of polyamide 6Journal of Applied Polymer Science, 2012
- Mechanical properties and flammability of sisal/PP composites: Effect of flame retardant type and contentComposites Part B: Engineering, 2009
- Flame retardancy mechanisms of metal phosphinates and metal phosphinates in combination with melamine cyanurate in glass‐fiber reinforced poly(1,4‐butylene terephthalate): the influence of metal cationPolymers for Advanced Technologies, 2008
- Flame retardancy mechanisms of aluminium phosphinate in combination with melamine polyphosphate and zinc borate in glass-fibre reinforced polyamide 6,6Polymer Degradation and Stability, 2007
- Influence of the oxidation state of phosphorus on the decomposition and fire behaviour of flame-retarded epoxy resin compositesPolymer, 2006
- Work of adhesion: contact angles and contact mechanicsInternational Journal of Adhesion and Adhesives, 1996