Effect of Ramp Angle on the Anti-Loosening Ability of Wedge Self-Locking Nuts Under Vibration
- 23 May 2018
- journal article
- research article
- Published by Wiley in Journal of Mechanical Design
- Vol. 140 (7) , 072301
Abstract
Recently, the wedge self-locking nut, a special anti-loosening product, is receiving more attention because of its excellent reliability in preventing loosening failure under vibration conditions. The key characteristic of a wedge self-locking nut is the special wedge ramp at the root of the thread. In this work, the effect of ramp angle on the anti-loosening ability of wedge self-locking nuts was studied systematically based on numerical simulations and experiments. Wedge self-locking nuts with nine ramp angles (10 deg, 15 deg, 20 deg, 25 deg, 30 deg, 35 deg, 40 deg, 45 deg, and 50 deg) were modeled using a finite element (FE) method, and manufactured using commercial production technology. Their anti-loosening abilities under transversal vibration conditions were analyzed based on numerical and experimental results. It was found that there is a threshold value of the initial preload below which the wedge self-locking nuts would lose their anti-loosening ability. This threshold value of initial preload was then proposed for use as a criterion to evaluate the anti-loosening ability of wedge self-locking nuts quantitatively and to determine the optimal ramp angle. Based on this criterion, it was demonstrated, numerically and experimentally, that a 30 deg wedge ramp resulted in the best anti-loosening ability among nine ramp angles studied. The significance of this study is that it provides an effective method to evaluate the anti-loosening ability of wedge self-locking nuts quantitatively, and determined the optimal ramp angle in terms of anti-loosening ability. The proposed method can also be used to optimize other parameters, such as the material properties and other dimensions, to guarantee the best anti-loosening ability of wedge self-locking nuts.Keywords
Funding Information
- National Natural Science Foundation of China (Grant No. 51605030)
- Ministry of Science and Technology of the People's Republic of China (Grant No. JCKY20162)
- National Natural Science Foundation of China (Grant No. 51675050)
- National Natural Science Foundation of China (Grant No. JCKY20162)
This publication has 13 references indexed in Scilit:
- Non‐destructive Examination of Loads in Regular and Self‐locking Spiralock® Threads through Energy‐resolved Neutron ImagingStrain, 2016
- A Novel Prevailing Torque Threaded Fastener and Its AnalysisJournal of Mechanical Design, 2013
- Avoiding self-loosening failure of bolted joints with numerical assessment of local contact stateEngineering Failure Analysis, 2011
- Proposition of Helical Thread Modeling With Accurate Geometry and Finite Element AnalysisJournal of Pressure Vessel Technology, 2008
- Three-dimensional finite element analysis of tightening and loosening mechanism of threaded fastenerEngineering Failure Analysis, 2005
- A Study of Early Stage Self-Loosening of Bolted JointsJournal of Mechanical Design, 2003
- Three-dimensional finite element analysis of threaded fastener loosening due to dynamic shear loadEngineering Failure Analysis, 2002
- EXPERIMENTAL STUDY OF LOOSENING OF THREADED FASTENERS DUE TO DYNAMIC SHEAR LOADSJournal of Sound and Vibration, 2002
- Optimizing study of SLBs for higher anti-loosening performanceJournal of Materials Processing Technology, 2001
- An anti-loosening screw-fastener innovation and its evaluationJournal of Materials Processing Technology, 1998