Microstructure and Plasticity Evolution During Lüders Deformation in an Fe-5Mn-0.1C Medium-Mn Steel
Authors:
- 15 October 2022
- journal article
- research article
- Published by Iron and Steel Institute of Japan in ISIJ International
- Vol. 62 (10) , 2036-2042
Abstract
The local plasticity and associated microstructure evolution in Fe-5Mn-0.1C medium-Mn steel (wt.%) were investigated in this study. Specifically, the micro-deformation mechanism during Lüders banding was characterized based on multi-scale electron backscatter diffraction measurements and electron channeling contrast imaging. Similar to other medium-Mn steels, the Fe-5Mn-0.1C steel showed discontinuous macroscopic deformation, preferential plastic deformation in austenite, and deformation-induced martensitic transformation during Lüders deformation. Hexagonal close-packed martensite was also observed as an intermediate phase. Furthermore, an in-situ neutron diffraction experiment revealed that the pre-existing body-centered cubic phase, which was mainly ferrite, was a minor deformation path, although ferrite was the major constituent phase.Keywords
This publication has 26 references indexed in Scilit:
- Yielding Behavior and Its Effect on Uniform Elongation of Fine Grained IF SteelMATERIALS TRANSACTIONS, 2014
- Transmission Electron Microscopy Analysis of Yielding in Ultrafine-Grained Medium Mn Transformation-Induced Plasticity SteelMetallurgical and Materials Transactions A, 2013
- Work hardening and uniform elongation of an ultrafine-grained Fe–33Mn binary alloyMaterials Science and Engineering: A, 2011
- Current Status of Engineering Materials Diffractometer at J-PARCMaterials Science Forum, 2011
- A Review of Strain Analysis Using Electron Backscatter DiffractionMicroscopy and Microanalysis, 2011
- Heterogeneous Deformation Behavior Studied by in Situ Neutron Diffraction during Tensile Deformation for Ferrite, Martensite and Pearlite SteelsISIJ International, 2008
- Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealingScripta Materialia, 2002
- Ultrafine-grained microstructures and mechanical properties of alloy steelsMetallurgical Transactions, 1972
- Lüders front propagation in low carbon steelsJournal of the Mechanics and Physics of Solids, 1962
- The Deformation and Ageing of Mild Steel: II Characteristics of the L ders DeformationProceedings of the Physical Society. Section B, 1951