Heavy metal decontamination by ion exchange polymers for water purification: counterintuitive cation removal by an anion exchange polymer
Open Access
- 12 February 2024
- journal article
- research article
- Published by Springer Nature in Journal of Materials Science
- Vol. 59 (7) , 2776-2787
Abstract
Ion exchange polymers were used for mercury and lead ions removal in water. The heavy metal ion concentration was analyzed by two independent methods: inductively coupled plasma–optical emission spectroscopy (ICP-OES) and gravimetry. The studied cation exchange polymer (CEP) was sulfonated poly(ether ether ketone) (SPEEK), and the anion exchange polymer (AEP) was poly(sulfone trimethylammonium) chloride (PSU-TMA). The removal capacity was connected with the ion exchange capacity (IEC) equal to 1.6 meq/g for both polymers. The concentration ranges were 0.15–0.006 mM for Hg2+ and 10.8–1.0 mM for Pb2+. SPEEK achieved 100% removal efficiency for mercury and lead if the concentration was below the maximum sorption capacity (Qmax), which was about 210 mg/g for Pb2+ with SPEEK. For PSU-TMA, the surprising removal efficiency of 100% for Hg2+, which seemed incompatible with ion exchange, was related to the formation of very stable complex anions that can be sorbed by an AEP. Langmuir adsorption theory was applied for the thermodynamic description of lead removal by SPEEK. A second-order law was effective to describe the kinetics of the process.Keywords
Funding Information
- Regione Lazio (A0375-2020-36521)
- Università degli Studi di Roma Tor Vergata
This publication has 47 references indexed in Scilit:
- Transport properties of proton- and hydroxide-exchange membranes for fuel cellsElectrochimica Acta, 2012
- Synthesis and Modification of Poly(ether ether ketone) and their Properties: A ReviewPolymer Reviews, 2012
- Perfluorinated sulfonic acid ionomer/poly(N-vinylpyrrolidone) nanofiber membranes: Electrospinning fabrication, water stability, and metal ion removal applicationsReactive and Functional Polymers, 2011
- Experimental and modeling studies of lead (II) sorption onto a polyvinyl-chloride inclusion membraneChemical Engineering Journal, 2011
- Transport of copper, nickel and zinc ions across ultrafiltration membrane based on modified polysulfone and cellulose acetateAsia-Pacific Journal of Chemical Engineering, 2010
- Ion-containing polymers: new energy & clean waterMaterials Today, 2010
- Stability constants for the formation of lead chloride complexes as a function of temperature and ionic strengthGeochimica et Cosmochimica Acta, 2007
- Ion exchange membranes: State of their development and perspectiveJournal of Membrane Science, 2005
- Selective removal of the heavy metal ions from waters and industrial wastewaters by ion-exchange methodChemosphere, 2004
- Proton Conduction Mechanisms at Low Degrees of Hydration in Sulfonic Acid–Based Polymer Electrolyte MembranesAnnual Review of Materials Research, 2003