Evaluation of the Mechanical Properties of CNT Based Composites Using Hexagonal RVE
- 1 August 2010
- journal article
- Published by Wiley in Journal of Nanotechnology in Engineering and Medicine
- Vol. 1 (3) , 031006
Abstract
Carbon nanotubes (CNTs) possess extremely high stiffness, strength, and resilience, and may provide ultimate reinforcing materials for the development of nanocomposites. In this paper, the effective material properties of CNT-based composites are evaluated based on the continuum mechanics using a hexagonal representative volume element (RVE). Numerical equations are used to extract the effective material properties from numerical solutions for the hexagonal RVEs under axial loading case. An extended rule of mixtures for estimating effective Young’s modulus in the axial direction of the RVE is applied. It has been observed that the addition of the CNTs in a matrix at volume fractions of only about 3.6%, the stiffness of the composite is increased by 33% for long CNT at Et/Em=10, whereas not much improvement in stiffness has been noticed in the case of short CNTS at Et/Em=10. Effectiveness of composites is evaluated in terms of various dimensions such as thickness, diameter, and length of CNT. These results suggest that short CNTs in a matrix may not be as effective as long CNTs in reinforcing a composite. The simulation results are consistent with the experimental ones reported in literature. Also, the comparative evaluation of all three types of RVEs is presented here.Keywords
This publication has 14 references indexed in Scilit:
- Effective in-plane stiffness and bending rigidity of armchair and zigzag carbon nanotubesInternational Journal of Solids and Structures, 2004
- Square representative volume elements for evaluating the effective material properties of carbon nanotube-based compositesComputational Materials Science, 2004
- Mechanical properties of carbon nanotubes: theoretical predictions and experimental measurementsComptes Rendus. Physique, 2003
- Evaluations of the effective material properties of carbon nanotube-based composites using a nanoscale representative volume elementMechanics of Materials, 2003
- Mechanics of C60 in NanotubesThe Journal of Physical Chemistry B, 2001
- Strength and Breaking Mechanism of Multiwalled Carbon Nanotubes Under Tensile LoadScience, 2000
- Deformation of carbon nanotubes in nanotube–polymer compositesApplied Physics Letters, 1999
- On the use of continuum mechanics to estimate the properties of nanotubesSolid State Communications, 1999
- Continuum methods of mechanics as a simplified approach to structural engineering of nanostructuresNanotechnology, 1998
- Helical microtubules of graphitic carbonNature, 1991