Periodic CO2 Injection for Improved Storage Capacity and Pressure Management under Intermittent CO2 Supply
Open Access
Abstract
Storing CO2 in geological formations is an important component of reducing greenhouse gases emissions. The Carbon Capture and Storage (CCS) industry is now in its establishing phase, and if successful, massive storage volumes would be needed. It will hence be important to utilize each storage site to its maximum, without challenging the formation integrity. For different reasons, supply of CO2 to the injection sites may be periodical or unstable, often considered as a risk element reducing the overall efficiency and economics of CCS projects. In this paper we present outcomes of investigations focusing on a variety of positive aspects of periodic CO2 injection, including pressure management and storage capacity, also highlighting reservoir monitoring opportunities. A feasibility study of periodic injection into an infinite saline aquifer using a mechanistic reservoir model has indicated significant improvement in storage capacity compared to continuous injection. The reservoir pressure and CO2 plume behavior were further studied revealing a ‘CO2 expansion squeeze’ effect that governs the improved storage capacity observed in the feasibility study. Finally, the improved pressure measurement and storage capacity by periodic injection was confirmed by field-scale simulations based on a real geological set-up. The field-scale simulations have confirmed that ‘CO2 expansion squeeze’ governs the positive effect, which is also influenced by well location in the geological structure and aquifer size, while CO2 dissolution in water showed minor influence. Additional reservoir effects and risks not covered in this paper are then highlighted as a scope for further studies. The value of the periodic injection with intermittent CO2 supply is finally discussed in the context of deployment and integration of this technology in the establishing CCS industry.Keywords
Funding Information
- European Commission (653718)
- Norges Forskningsråd (323301)
This publication has 27 references indexed in Scilit:
- Status of CO2storage in deep saline aquifers with emphasis on modeling approaches and practical simulationsWater Resources Research, 2015
- Analysis of unusual scale build-up in a CO2injection well for a pilot-scale CO2storage demonstration projectGreenhouse Gases: Science and Technology, 2014
- Reservoir Management of CO2 Injection: Pressure Control and Capacity EnhancementEnergy Procedia, 2013
- Snøhvit: The History of Injecting and Storing 1 Mt CO2 in the Fluvial Tubåen FmEnergy Procedia, 2013
- Combining brine extraction, desalination, and residual-brine reinjection with CO2 storage in saline formations: Implications for pressure management, capacity, and risk mitigationEnergy Procedia, 2011
- Re-establishment of the proper injectivity of the CO2-injection well Ktzi 201 in Ketzin, GermanyInternational Journal of Greenhouse Gas Control, 2010
- An Evaluation of CO2 Huff 'n' Puff Tests in TexasJournal of Petroleum Technology, 1989
- A Laboratory and Field Evaluation of the CO2 Huff ’n’ Puff Process for Light-Oil RecoverySPE Reservoir Engineering, 1988
- The CO2 Huff 'n' Puff Process in a Bottomwater-Drive ReservoirJournal of Petroleum Technology, 1988
- Effect of WAG Injection and Rock Wettability on Oil Recovery During CO2 FloodingSPE Reservoir Engineering, 1988