Study on Microstructure and Wear Resistance of Multi-Layer Laser Cladding Fe901 Coating on 65 Mn Steel
Open Access
Abstract
65 Mn is a high-quality carbon structural steel that exhibits excellent mechanical properties and machinability. It finds broad applications in machinery manufacturing, agricultural tools, and mining equipment, and is commonly used for producing mechanical parts, springs, and cutting tools. Fe901 is an iron-based alloy that exhibits excellent hardness, structural stability, and wear resistance. It is widely used in surface engineering applications, especially laser cladding, due to its ability to form dense and crack-free metallurgical coatings. To enhance the surface hardness and wear resistance of 65 Mn steel, this study employs a laser melting process to deposit a multi-layer Fe901 alloy coating. The phase composition, microstructure, microhardness, and wear resistance of the coatings are investigated using X-ray diffraction (XRD), optical microscopy, scanning electron microscopy (SEM), Vickers hardness testing, and friction-wear testing. The results show that the coatings are dense and uniform, without visible defects. The main phases in the coating include solid solution, carbides, and α-phase. The microstructure comprises dendritic, columnar, and equiaxed crystals. The microhardness of the cladding layer increases significantly, with the multilayer coating reaching 3.59 times the hardness of the 65 Mn substrate. The coatings exhibit stable and relatively low friction coefficients ranging from 0.38 to 0.58. Under identical testing conditions, the wear resistance of the coating surpasses that of the substrate, and the multilayer coating shows better wear performance than the single-layer one.Keywords
This publication has 32 references indexed in Scilit:
- Retarding effect of submicron carbides on short fatigue crack propagation: Mechanistic modeling and Experimental validationActa Materialia, 2023
- Quality prediction of tractor rotary tillage based on BiConvLSTM with self-attentionComputers and Electronics in Agriculture, 2023
- Synthesis and microstructure, properties characterization of Ni-Ti-Cu/Cu-Al functionally graded coating on Mg-Li alloy by laser claddingApplied Surface Science, 2022
- Design and development of TiC-reinforced 410 martensitic stainless steel coatings fabricated by laser claddingCeramics International, 2021
- Study on microstructure and properties of a Fe-based SMA/PZT composite coating produced by laser claddingJournal of Alloys and Compounds, 2020
- Investigation on laser cladding high-hardness nano-ceramic coating assisted by ultrasonic vibration processingOptik, 2016
- Microstructure evolution and mechanical properties of multiple-layer laser cladding coating of 308L stainless steelApplied Surface Science, 2015
- Corrosion and wear behavior of Ni60CuMoW coatings fabricated by combination of laser cladding and mechanical vibration processingJournal of Alloys and Compounds, 2015
- Microstructural characterization of AISI 431 martensitic stainless steel laser-deposited coatingsJournal of Materials Science, 2011
- Effect of a small increase in the Ni content on the properties of a laser surface clad Fe-based alloyApplied Surface Science, 2007