Analysis of direct capture of ${\hbox {CO}}_{2}$ from ambient air via steam-assisted temperature–vacuum swing adsorption
Open Access
- 11 August 2020
- journal article
- research article
- Published by Springer Nature in Adsorption
- Vol. 26 (7) , 1183-1197
Abstract
In this work, direct air capture (DAC) via adsorption is studied through the design and analysis of two temperature–vacuum swing adsorption (TVSA) cycles. In the first part, a novel way of describing the adsorption of $${\hbox {CO}}_{2}$$ in presence of water vapor is proposed for co-adsorption kinetic and thermodynamic data gathered from the literature. Secondly, two TVSA cycle designs are proposed: one with a desorption step via external heating, and one with a steam purge. A schematic method for the determination of the cycle step times is proposed and a parametric study on the operating conditions is performed via cycle simulations using a detailed, first principles model. Finally, the two cycles are compared in terms of $${\hbox {CO}}_{2}$$ production and energy consumption. The parametric study on the desorption time shows that there is a desorption time yielding the highest $${\hbox {CO}}_{2}$$ production at low energy consumptions. Low evacuation pressures are necessary to reach high $${\hbox {CO}}_{2}$$ production, but higher evacuation pressures show to be always favorable in terms of specific electrical energy requirements. A steam purge requires an additional thermal energy cost, but it not only allows decreasing the specific electrical energy consumptions, it also enhances $${\hbox {CO}}_{2}$$ desorption kinetics and allows reaching higher $${\hbox {CO}}_{2}$$ productions at milder evacuation pressures. The results of this work present the possibility to directly relate the availability of power and heat to the design of the cycle.
Keywords
Funding Information
- Innosuisse - Schweizerische Agentur für Innovationsförderung (KTI. 1155000150)
This publication has 28 references indexed in Scilit:
- A parametric study of a PSA process for pre-combustion CO2 captureSeparation and Purification Technology, 2013
- Direct air capture of CO2 with chemicals: optimization of a two-loop hydroxide carbonate system using a countercurrent air-liquid contactorClimatic Change, 2013
- Concurrent Separation of CO2 and H2O from Air by a Temperature-Vacuum Swing Adsorption/Desorption CycleEnvironmental Science & Technology, 2012
- Fixed bed adsorption of CO2/H2 mixtures on activated carbon: experiments and modelingAdsorption, 2012
- Amine-Based Nanofibrillated Cellulose As Adsorbent for CO2 Capture from AirEnvironmental Science & Technology, 2011
- Modeling adsorption of CO2 on amine-functionalized mesoporous silica. 2: Kinetics and breakthrough curvesChemical Engineering Journal, 2010
- Steam‐Stripping for Regeneration of Supported Amine‐Based CO2 AdsorbentsChemSusChem, 2010
- Further investigations of CO2 capture using triamine-grafted pore-expanded mesoporous silicaChemical Engineering Journal, 2010
- New Insights into the Interactions of CO2 with Amine-Functionalized SilicaIndustrial & Engineering Chemistry Research, 2008
- Process design and energy requirements for the capture of carbon dioxide from airChemical Engineering and Processing - Process Intensification, 2006