Seismic fragility assessment of long-span cable-stayed bridges in China
- 28 July 2016
- journal article
- review article
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 19 (11) , 1797-1812
Abstract
In the existing fragility assessment, most bridges are short-span bridges and a few bridges have long spans such as cable-stayed bridges. In this study, a procedure is proposed to conduct the component and system seismic fragility analysis of long-span cable-stayed bridges. Three critical issues are addressed in the procedure: (1) the optimal intensity measure of cable-stayed bridges, (2) limit state models of various components, and (3) contribution of individual components to the entire system failure of bridges. This study chooses a long-span cable-stayed bridge with the most common configuration in China and builds the numerical model of its multiple components using OpenSEES that can account for their nonlinear response and uncertainties in the ground motion and material properties. Four typical intensity measures are compared with respect to four characteristic properties including efficiency, practicality, sufficiency, and proficiency. Peak ground velocity turns out to be the optimal intensity measure. Limit states of pylon sections are derived by a numerical simulation based on pushover analysis and China’s guidelines. The pushover results indicate that the limit state of their section curvature depends highly on the section type and axial compression coefficient. A joint probabilistic seismic demand model and Monte Carlo simulation are employed to obtain an accurate system fragility estimate of cable-stayed bridges by accounting for the contribution of each component to the overall bridge system. The system fragility curves based on Monte Carlo simulation lie much closer to the upper bound fragilities given small correlation coefficients, implying that seismic demands of various components conditioned on the peak ground velocity are not correlated.Keywords
This publication has 23 references indexed in Scilit:
- Seismic Fragility Relationships of a Cable-Stayed Bridge Equipped with Response Modification SystemsJournal of Bridge Engineering, 2014
- Analytical Fragility Curves for Ordinary Highway Bridges in TurkeyEarthquake Spectra, 2011
- Nonlinear Finite-Element Analysis Software Architecture Using Object CompositionJournal of Computing in Civil Engineering, 2010
- Seismic reliability of a cable-stayed bridge retrofitted with hysteretic devicesComputers & Structures, 2008
- Structure‐Specific Scalar Intensity Measures for Near‐Source and Ordinary Earthquake Ground MotionsEarthquake Spectra, 2007
- A vector-valued ground motion intensity measure consisting of spectral acceleration and epsilonEarthquake Engineering & Structural Dynamics, 2005
- Comparing the adequacy of alternative ground motion intensity measures for the estimation of structural responsesEarthquake Engineering & Structural Dynamics, 2004
- Seismic fragility of typical bridges in moderate seismic zonesEngineering Structures, 2004
- Probabilistic Basis for 2000 SAC Federal Emergency Management Agency Steel Moment Frame GuidelinesJournal of Structural Engineering, 2002
- 2. Statistical Analysis of Bridge Damage Data from the 1994 Northridge, CA, EarthquakeEarthquake Spectra, 1999