Improving the enzymatic hydrolysis of thermo-mechanical fiber from Eucalyptus urophylla by a combination of hydrothermal pretreatment and alkali fractionation
Open Access
- 20 August 2014
- journal article
- research article
- Published by Springer Nature in Biotechnology for Biofuels
- Vol. 7 (1) , 1-12
Abstract
The recalcitrance of lignocellulosic biomass is a major limitation for its conversion into biofuels by enzymatic hydrolysis. The use of a pretreatment technology is an essential step to diminish biomass recalcitrance for bioethanol production. In this study, a two-step pretreatment using hydrothermal pretreatment at various temperatures and alkali fractionation was performed on eucalyptus fiber. The detailed chemical composition, physicochemical characteristics, and morphology of the pretreated fibers in each of the fractions were evaluated to advance the performance of eucalyptus fiber in enzymatic digestibility. The hydrothermal pretreatment (100 to 220°C) significantly degraded hemicelluloses, resulting in an increased crystallinity of the pretreated fibers. However, as the pretreatment temperature reached 240°C, partial cellulose was degraded, resulting in a reduced crystallinity of cellulose. As compared to the hydrothermal pretreatment alone, a combination of hydrothermal and alkali treatments significantly removed hemicelluloses and lignin, resulting in an improved enzymatic hydrolysis of the cellulose-rich fractions. As compared with the raw fiber, the enzymatic hydrolysis rate increased 1.1 to 8.5 times as the hydrothermal pretreatment temperature increased from 100 to 240°C. Interestingly, after a combination of hydrothermal pretreatment and alkali fractionation, the enzymatic hydrolysis rate increased 3.7 to 9.2 times. Taking into consideration the consumption of energy and the production of xylo-oligosaccharides and lignin, an optimum pretreatment condition was found to be hydrothermal pretreatment at 180°C for 30 min and alkali fractionation with 2% NaOH at 90°C for 2.5 h, in which 66.3% cellulose was converted into glucose by enzymatic hydrolysis. The combination of hydrothermal pretreatment and alkali fractionation was a promising method to remove hemicelluloses and lignin as well as overcome the biomass recalcitrance for enzymatic hydrolysis from eucalyptus fiber. In addition, the various techniques applied in this work constituted an efficient approach to understand the underlying chemical and morphological changes of the cellulose-rich fractions.Keywords
This publication has 38 references indexed in Scilit:
- Characteristics and enzymatic hydrolysis of cellulose-rich fractions from steam exploded and sequentially alkali delignified bamboo (Phyllostachys pubescens)Bioresource Technology, 2014
- Biomass recalcitrance. Part I: the chemical compositions and physical structures affecting the enzymatic hydrolysis of lignocelluloseBiofuels, Bioproducts and Biorefining, 2012
- Chemical composition and enzymatic digestibility of sugarcane clones selected for varied lignin contentBiotechnology for Biofuels, 2011
- Potential of hydrothermal treatments in lignocellulose biorefineriesBiofuels, Bioproducts and Biorefining, 2011
- Dilute mixed-acid pretreatment of sugarcane bagasse for ethanol productionBiomass and Bioenergy, 2011
- Access of cellulase to cellulose and lignin for poplar solids produced by leading pretreatment technologiesBiotechnology Progress, 2009
- Hydrolysis of lignocellulosic materials for ethanol production: a reviewBioresource Technology, 2002
- Hydrothermal processing of lignocellulosic materialsEuropean Journal of Wood and Wood Products, 1999
- Effect of chemical solutions sprayed on sugarcane bagasse pith to produce single cell protein: Physical and chemical analyses of pithBioresource Technology, 1994
- Sugarcane bagasse pith dry pretreatment for single cell protein productionBioresource Technology, 1992