Application of Wool in High-velocity Ballistic Protective Fabrics
Authors:
- 30 October 2009
- journal article
- other
- Published by SAGE Publications in Textile Research Journal
- Vol. 80 (11) , 1083-1092
Abstract
The protective power of typical aramid-based ballistic fabrics, when assembled into multi-layered panels designed to defeat high-velocity ballistic impacts, can be improved if wool is incorporated into the weave structure. Although the synthetic is still the primary energy-absorbent material, the wool plays a complementary role by increasing resistive interactions between the yarns and filaments. Wool restricts the lateral separation of the synthetic yarns and ensures that more directly impacted yarns are held in place to dissipate the impact energy. Wool increases the energy-absorption mechanism of yarn pull-in by increasing the longitudinal friction along the yarns/filaments, in particular near the free edges of the fabric layers. The wool absorbs water that may otherwise lubricate synthetic filaments and so improves the wet performance. Ballistics tests have shown that synthetic fabrics blended with wool can at least match the dry or wet ballistic performance of an equivalent pure Kevlar fabric when tested under National Institute of Justice (NIJ) Ballistic Standard Level III A. The inclusion of the wool can significantly improve the tear strength of pure synthetic ballistic fabrics.Keywords
This publication has 19 references indexed in Scilit:
- Modeling friction effects on the ballistic impact behavior of a single-ply high-strength fabricInternational Journal of Impact Engineering, 2005
- Yarn Pull-Out as a Mechanism for Dissipating Ballistic Impact Energy in Kevlar® KM-2 FabricTextile Research Journal, 2004
- Yarn Pull-Out as a Mechanism for Dissipating Ballistic Impact Energy in Kevlar® KM-2 FabricTextile Research Journal, 2004
- Slow Penetration of Ballistic FabricsTextile Research Journal, 2003
- Finite-element modeling of the ballistic impact of fabric armorInternational Journal of Impact Engineering, 2003
- Penetration Failure Mechanisms of Armor-Grade Fiber Composites under ImpactJournal of Composite Materials, 2001
- Heat as a Factor in the Penetration of Cloth Ballistic Panels by 0.22 Caliber ProjectilesTextile Research Journal, 2000
- Ballistic impact of fibre composite armours by fragment-simulating projectilesComposites Part A: Applied Science and Manufacturing, 1996
- Modelling deformation and damage characteristics of woven fabric under small projectile impactInternational Journal of Impact Engineering, 1995
- The ballistic impact characteristics of aramid fabrics: The influence of interface frictionWear, 1992