Design of a Friction Clutch Using Dual Belleville Structures
- 11 August 2006
- journal article
- Published by Wiley in Journal of Mechanical Design
- Vol. 129 (9) , 986-990
Abstract
This paper presents a simplified friction clutch design, which consists of the dual Belleville spring and the friction plates. This design exploits the preset angle on the Belleville spring to increase the friction area during operation; thus, the load on spring is reduced at a given transmitted torque. Due to the increasing of friction area, the Belleville spring can also act as a friction plate, and the components required for the clutch can be reduced. The maximum transmittable torque of the clutch is easily adjusted by varying the preload on the Belleville spring. Moreover, it is very easy to assemble the components of the present clutch. To demonstrate the present design, a prototype friction clutch with a Belleville spring has been fabricated and tested. We showed that the transmitted torque remained constant for different operating speeds.Keywords
This publication has 7 references indexed in Scilit:
- Reliability Optimization Involving Mixed Continuous-Discrete Uncertainties2005
- A CAD Program for the Automated Checkout and Design of Belleville SpringsJournal of Mechanical Design, 2002
- Stiffness of Variable Thickness Belleville SpringsJournal of Mechanical Design, 1998
- Material Nonlinearity Effects in the Stress Analysis of Conical Disk SpringsJournal of Mechanical Design, 1992
- Sliding wear of 304 and 310 stainless steelsWear, 1985
- Buckling and postbuckling behavior of spherical caps under axisymmetric loadAIAA Journal, 1970
- The buckling and post-buckling behavior of spherical caps under concentrated loadInternational Journal of Solids and Structures, 1968