Novel Multi-Electrode Test Method for Evaluating Inhibition of Underdeposit Corrosion—Part 1: Sweet Conditions
Authors:
- 1 April 2010
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 66 (4) , 046001-1
Abstract
A multi-electrode test method has been developed to assess the performance of corrosion inhibitors under sand deposits for oil and gas applications. The electrode array is mounted in a cup under a layer of sand and coupled to an external carbon steel electrode in such a way that the galvanic corrosion current at each electrode can be monitored. The test method was demonstrated on two different inhibitors exposed to a simulated field brine at 60°C under sweet (carbon dioxide [CO2]) conditions. In these sweet solution tests, replenishment of inhibitor concentration at regular intervals to reflect conditions in service provided a more severe test of inhibitor performance. The adoption of the multi-electrode array highlighted the importance of statistical variations in determining the worst-case corrosion rate, which might otherwise not be identified in conventional tests, and enabled assessment of the effect of different levels of precorrosion in a single test.Keywords
This publication has 5 references indexed in Scilit:
- Novel Multi-Electrode Test Method for Evaluating Inhibition of Underdeposit Corrosion—Part 2: Sour ConditionsCorrosion, 2010
- CO2 Corrosion Inhibitor Performance in the Presence of Solids: Test Method Development2008
- Investigation of Crevice Corrosion of AISI 316 Stainless Steel and Ni-Cr-Mo Alloy 625 Using Coupled Multi-Electrode Arrays2007
- Development of Corrosion Inhibitors to Address under Deposit Corrosion in Oil and Gas Production Systems2005
- Effectiveness of Corrosion Inhibitors in Retarding the Rate of Propagation of Localized CorrosionCorrosion, 2003