Investigation of Electrochemical, Optical and Thermal Effects during Flash Sintering of 8YSZ
Top Cited Papers
Open Access
Abstract
This paper reports the electrochemical, optical and thermal effects occurring during flash sintering of 8 mol % yttria-stabilized zirconia (8YSZ). In-situ observations of polycrystalline and single crystal specimens revealed electrochemical blackening/darkening during an incubation period prior to flash sintering. The phenomenon is induced by cathodic partial reduction under DC fields. When using a low frequency AC field (0.1–10 Hz) the blackening is reversible, following the imposed polarity switching. Thermal imaging combined with sample colour changes and electrical conductivity mapping give a complete picture of the multi-physical phenomena occurring during each stage of the flash sintering event. The partial reduction at the cathode causes a modification of the electrical properties in the sample and the blackened regions, which are close to the cathode, are more conductive than the remainder of the sample. The asymmetrical nature of the electrochemical reactions follows the field polarity and causes an asymmetry in the temperature between the anode and cathode, with the positive electrode tending to overheat. It is also observed that the phenomena are influenced by the quality of the electrical contacts and by the atmosphere used.Keywords
This publication has 47 references indexed in Scilit:
- Viscous flow flash sintering of porous silica glassJournal of Non-Crystalline Solids, 2017
- Porcelain stoneware consolidation by flash sinteringJournal of the American Ceramic Society, 2017
- Liquid phase flash sintering in magnesia silicate glass-containing aluminaJournal of the European Ceramic Society, 2017
- Electric field-assisted flash sintering of tin dioxideJournal of the European Ceramic Society, 2014
- The Effect of Electric Field on Sintering and Electrical Conductivity of TitaniaJournal of the American Ceramic Society, 2013
- Preliminary investigation of flash sintering of SiCJournal of the European Ceramic Society, 2013
- Electric Field Assisted Sintering of Cubic Zirconia at 390°CJournal of the American Ceramic Society, 2013
- A novel sintering method to obtain fully dense gadolinia doped ceria by applying a direct currentJournal of Power Sources, 2012
- Field assisted and flash sintering of alumina and its relationship to conductivity and MgO-dopingJournal of the European Ceramic Society, 2011
- Flash Sintering of Nanograin Zirconia in <5 s at 850°CJournal of the American Ceramic Society, 2010