Synthesis of WS2nanostructures from the reaction of WO3with CS2and mechanical characterization of WS2nanotube composites
Authors:
- C C LuhrsCLC C Luhrs
- M S Al-HaikM S Al-Haik
- J TrevinoJTJ Trevino
- H ZeaHZH Zea
- 9 June 2011
- journal article
- Published by IOP Publishing in Nanotechnology
- Vol. 22 (28) , 285714
Abstract
Tungsten disulfide (WS(2)) nanometer sheets, spheres, fibers and tubes were generated by a synthetic pathway that avoids the use of H(2)S as the source of sulfur and employs instead CS(2) vapor, carried by an Ar or N(2)/H(2) stream in a heated tubular furnace, for the reaction with WO(3) precursor powders. The experiments were conducted at temperatures between 700 and 1000 °C, while the reaction times expanded between 30 min and 24 h. Characterization methods used to analyze the products of the synthesis include TEM, SEM, XRD and EDX. We found a strong correlation between precursor and product microstructure, although the temperature and reaction times play a critical role in the products' microstructural features as well. WS(2) inorganic fullerene (IF) nanospheres are generated in a wide window of conditions, while nanotubes and nanofibers are only produced at high temperatures or long reaction times. A proposed growth mechanism based on the CS(2) synthetic approach is presented. Nanoindentation and nano-impulse techniques were used to characterize the mechanical properties of polymer matrix-WS(2) nanotube composites, finding them superior to equivalent SWCNT composites. The improvements in toughness of nanocomposites based on WS(2) can be attributed to geometrical and morphological effects that assisted several toughening mechanisms such as crack pinning and the formation of an immobilized polymeric interphase around the nanotubes.Keywords
This publication has 45 references indexed in Scilit:
- Fullerene-like MoS2 Nanoparticles and Their Tribological BehaviorTribology Letters, 2009
- Mechanical Properties of WS2 NanotubesJournal of Cluster Science, 2007
- Formation of transition-metal sulfide microspheres or microtubesMaterials Chemistry and Physics, 2006
- Synthesis of inorganic fullerene-like WS2nanoparticles and their lubricating performanceNanotechnology, 2006
- Shock-Absorbing and Failure Mechanisms of WS2 and MoS2 Nanoparticles with Fullerene-like Structures under Shock Wave PressureJournal of the American Chemical Society, 2005
- Synthesis of Fullerene‐Like Tantalum Disulfide Nanoparticles by a Gas‐Phase Reaction and Laser AblationSmall, 2005
- Comparative Study of WS2 and Co(Ni)/WS2 HDS Catalysts Prepared by ex situ/in situ Activation of Ammonium ThiotungstateCatalysis Letters, 2003
- Complex WS2 nanostructuresChemical Physics Letters, 2002
- Self-Assembly of Subnanometer-Diameter Single-Wall MoS 2 NanotubesScience, 2001
- Simple Synthesis of MoS2 and WS2 NanotubesAdvanced Materials, 2001