Permanent Magnet Hybrid Core Inductors for High Saturation Capability
Open Access
- 24 July 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 4, 603-614
Abstract
Inductor designs with large dc current relative to ac ripple are often constrained by saturation, which limits their size, loss, and current-carrying capability. Typical saturation-limited designs, though, further handicap their performance by substantially underutilizing their core material's flux carrying capabilities. Instead of operating the core across its full flux swing range from reverse saturation to forward saturation, these designs only use half the range. To use the full range, we propose a permanent magnet (PM) hybrid core in which a PM provides a dc flux offset in the core, boosting its effective saturation capability. In the proposed core, the PM is placed outside of the main winding flux path to reduce losses and risk for PM demagnetization. In this work, we derive first-order theory for analyzing and designing the PM hybrid core. We then provide some example PM hybrid core implementations. Finally, we demonstrate a working proof-of-concept prototype using off-the-shelf parts that outperforms two comparable ferrite inductor designs. This PM hybrid core prototype achieves half the dc resistance of a ferrite inductor with the same energy storage, and it achieves 70% more energy storage than a ferrite inductor with the same dc resistance. The prototype's improved performance thus demonstrates the potential advantages of the PM hybrid core.Keywords
Funding Information
- pSemi
- National Science Foundation Graduate Research Fellowship (1745302, 2141064)
- E.E. Landsman (1958) Fellowship
This publication has 19 references indexed in Scilit:
- Core Loss Model for Arbitrary Excitations With DC Bias Covering a Wide Frequency RangeIEEE Transactions on Magnetics, 2021
- Permanent-Magnet Coupled Power Inductor for Multiphase DC–DC Power ConvertersIEEE Transactions on Industrial Electronics, 2016
- Half Size Reduction of DC Output Filter Inductors With the Saturation-Gap Magnetic Bias TopologyIEEE Journal of Emerging and Selected Topics in Power Electronics, 2016
- Measurements and Performance Factor Comparisons of Magnetic Materials at High FrequencyIEEE Transactions on Power Electronics, 2016
- Evaluation of High-Current Toroid Power Inductor With NdFeB Magnet for DC–DC Power ConvertersIEEE Transactions on Industrial Electronics, 2015
- Review of Magnetic Material Degradation Characteristics for the Design of Premagnetized InductorsIEEE Transactions on Magnetics, 2013
- Transformers and Inductors for Power Electronics2013
- Core Losses Under the DC Bias Condition Based on Steinmetz ParametersIEEE Transactions on Power Electronics, 2012
- Evaluation of Magnetic Materials for Very High Frequency Power ApplicationsIEEE Transactions on Power Electronics, 2011
- Revised Magnetics Performance Factors and Experimental Comparison of High-Flux Materials for High-Current DC–DC InductorsIEEE Transactions on Power Electronics, 2011