Corrosion of Zinc and Zn-Mg Alloys with Varying Microstructures and Magnesium Contents
Authors:
- 17 December 2013
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 161 (3) , C156-C161
Abstract
This work addresses the effect of the Mg-content on the corrosion performance of Zn-Mg alloys. Since only low Mg-contents are used in modern Zn-Mg-X coatings, the magnesium in the investigated Zn-Mg alloys was varied in the low content range from 0 wt% to 3 wt%. In addition pure, intermetallic MgZn2 was investigated for comparison. Furthermore, for the case of the alloy with 2 wt% magnesium, the effect of different microstructure at same composition was investigated, which was adjusted by applying different cooling rates during solidification from the melt. The alloys can be ranked in order of the fineness of their microstructure. With increasing magnesium content the lamellar eutectic becomes finer and more evenly distributed. The slowly cooled specimen exhibits coarser microstructure than the quenched alloy. The corrosion of the investigated alloys can be described in three stages, i.e. activation, active corrosion and formation of a protective layer. While the development of the corrosion resistance in the first two stages is very similar for all investigated alloys, in the last stage distinct differences were found for the different samples. It was observed that an increase of the fineness of the microstructure leads to an improved corrosion performance. (C) 2014 The Electrochemical Society. All rights reservedKeywords
This publication has 19 references indexed in Scilit:
- Chemistry of corrosion products of Zn and MgZn pure phases under atmospheric conditionsCorrosion Science, 2012
- Cathodic self-healing at cut-edges: The effect of Zn2+ and Mg2+ ionsCorrosion Science, 2012
- In situ monitoring of the microstructural corrosion mechanisms of zinc–magnesium–aluminium alloys using time lapse microscopyCorrosion Science, 2011
- Understanding corrosion via corrosion product characterization: I. Case study of the role of Mg alloying in Zn–Mg coating on steelCorrosion Science, 2009
- Investigation of self-healing mechanism on galvanized steels cut edges by coupling SVET and numerical modelingElectrochimica Acta, 2008
- The effect of magnesium additions on the microstructure and cut edge corrosion resistance of zinc aluminium alloy galvanised steelCorrosion Science, 2008
- Observation of Self-Healing Functions on the Cut Edge of Galvanized Steel Using SVET and pH MicroscopyJournal of the Electrochemical Society, 2006
- Localized Electrochemical Methods Applied to Cut Edge CorrosionJournal of the Electrochemical Society, 2000
- Self-Healing Ability of Zinc-Plated Steel Coated with Magnesium Electrodeposited from a Molten SaltMaterials Transactions, JIM, 1997
- Inhibition of Anodic Dissolution of Zinc-plated Steel by Electro-deposition of Magnesium from a Molten Salt.ISIJ International, 1997