Thermal and mechanical properties of phenolphthalein polyethersulfone/poly(phenylene sulfide) blends
Authors:
- 24 January 1995
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 55 (4) , 633-639
Abstract
The thermal and mechanical properties of phenolphthalein polyethersulfone/poly(phenylene sulfide) (PES‐C/PPS) blends were studied using a differential scanning calorimeter, a dynamic mechanical analyzer, and mechanical characterization. The morphologies of fracture surfaces were observed by scanning electron microscopy. The blends are multiphase systems with strong interaction between the two phases. It is of interest that, although the strength and ductility of PPS are lower than those of PES‐C, the addition of PPS can improve markedly the impact strength of PES‐C without changing its higher strength. The PPS can also act as a flow aid for PES‐C. © 1995 John Wiley & Sons, Inc.Keywords
This publication has 11 references indexed in Scilit:
- Viscosity–morphology–compatibility relationship of polymer blendsJournal of Applied Polymer Science, 1993
- Characterization of thermotropic liquid crystalline polyester/polysulfone blendsPolymer Engineering & Science, 1992
- Blends of a liquid crystalline polymer with polyether ether ketonePolymer Engineering & Science, 1992
- Blends of a polyetherimide and a liquid crystalline polymer: Fiber orientation and mechanical propertiesJournal of Applied Polymer Science, 1991
- The dynamic properties, temperature transitions, and thermal stability of poly (etherether ketone)‐thermotropic liquid crystalline polymer blendsPolymer Engineering & Science, 1991
- Characteristics of binary and ternary blends of poly (p‐phenylene sulfide) with poly(bis phenol A) sulfone and polyetherimidePolymer Engineering & Science, 1991
- Polysulphone and poly(phenylene sulphide) blends: 1. Thermal characterization and phase morphologyPolymer, 1990
- Applications for thermotropic liquid crystal polymer blends,Advances in Polymer Technology, 1990
- In situ composites: Blends of isotropic polymers and thermotropic liquid crystalline polymersPolymer Engineering & Science, 1987
- Compatible glassy polyblends based upon poly(2,6‐dimethyl‐1,4‐phenylene oxide): Tensile modulus studiesPolymer Engineering & Science, 1979