Effect of Prior Athermal Martensite on the Isothermal Transformation Kinetics Below M s in a Low-C High-Si Steel
Open Access
- 29 December 2015
- journal article
- Published by Springer Nature in Metallurgical and Materials Transactions A
- Vol. 47 (3) , 1028-1039
Abstract
Thermomechanical processing of Advanced Multiphase High Strength Steels often includes isothermal treatments around the martensite start temperature (M s). It has been reported that the presence of martensite formed prior to these isothermal treatments accelerates the kinetics of the subsequent transformation. This kinetic effect is commonly attributed to the creation of potential nucleation sites at martensite-austenite interfaces. The aim of this study is to determine qualitatively and quantitatively the effect of a small volume fraction of martensite on the nucleation kinetics of the subsequent transformation. For this purpose, dilatometry experiments were performed at different temperatures above and below the M s temperature for athermal martensite in a low-carbon high-silicon steel. Microstructural analysis led to the identification of the isothermal decomposition product formed above and below M s as bainitic ferrite. The analysis of the transformation processes demonstrated that the initial stage of formation of bainitic ferrite at heat treatments below M s is at least two orders of magnitude faster than above M s due to the presence of martensite.Keywords
This publication has 24 references indexed in Scilit:
- Analyses of Transformation Kinetics of Carbide-Free Bainite Above and Below the Athermal Martensite-Start TemperatureMetallurgical and Materials Transactions A, 2011
- Microstructure – Properties Relationships in Carbide-free Bainitic SteelsISIJ International, 2011
- The Isothermal Transformation of Low-Alloy Low-C CMnSi Steels below MSMaterials Science Forum, 2010
- Effect of Martensite in Initial Structure on Bainite TransformationMaterials Science Forum, 2010
- Formability of Al–Nb Bearing Ultra High-strength TRIP-aided Sheet Steels with Bainitic Ferrite and/or Martensite MatrixISIJ International, 2010
- Observation of an Isothermal Transformation during Quenching and Partitioning ProcessingMetallurgical and Materials Transactions A, 2009
- Experimental evidence for bainite formation below Ms in Fe–0.66CScripta Materialia, 2008
- Microstructures and Properties of a Bainite and Martensite Dual-Phase Cast Steel Fabricated by Combination of Alloying and Controlled Cooling Heat TreatmentMaterials Science Forum, 2005
- Retained Austenite Characteristics and Tensile Properties in a TRIP Type Bainitic Sheet Steel.ISIJ International, 2000
- Swing back in kinetics nearM s in hypereutectoid steelsMetallurgical Transactions A, 1988