Investigation of Wettability Alteration by Silica Nanoparticles Through Advanced Surface-Wetting Visualization Techniques
Authors:
- 23 September 2019
- conference paper
- Published by Society of Petroleum Engineers (SPE)
Abstract
Altering the wetting state of a rock surface to more water-wet has been proposed as an enhanced oil recovery (EOR) mechanism for nanoparticles. However, how nanoparticles achieve this is not well understood. The objective of this study is to fill this knowledge gap by using advanced 2D and 3D visualization techniques. In this study, advanced visualization techniques were used to study how hydrophilic silica nanoparticles change the wettability of a glass surface. First, we used interferograms of an oil drop resting on a nanoparticle-treated glass surface to analyze the effect of nanoparticles on wettability. Second, we used Atomic Force Microscopy (AFM) to characterize the structure of nanoparticles covering a glass surface. Third, we used a 2D microfluidic apparatus to visualize wettability alteration caused by the nanoparticle injection. Fourth, we used a fluoresence imaging method with confocal microscopy to find out the reason for this change. Interferograms of a nanoparticle-treated glass surface showed bright and dark fringes, indicating the presence of a thin water film covering the glass surface caused by nanoparticle adsorption. Furthermore, the higher the nanoparticle concentration, the thicker was the nanoparticle adsorption layer. A low pH environment can reduce nanoparticle adsorption on the glass surface. AFM results showed that the topography of the glass surface changed from smooth to rough after nanoparticle treatment. Microfluidic experiments showed that nanoparticle injection changed the wettability of the grain surface to more water wet. By using a confocal microscopy, we observed a thin water film covering the surface of glass grains suggesting that nanoparticle adsorption is the main mechanism of wettability alteration by nanoparticles. This paper presents findings of new techniques to study wettability alteration by nanoparticles, including thin-film interferometry, surface characterization by AFM, and fluoresence imaging with confocal microscopy. Observations showed that nanoparticles adsorption on a glass surface results in a thin water film that prevents the oil from contacting the surface. This is the main mechanism of wettability alteration by nanoparticles. This is the first time use of these advanced visualization techniques to study wettability alteration by nanoparticles is reported.Keywords
This publication has 30 references indexed in Scilit:
- Nanofluids Alter the Surface Wettability of SolidsLangmuir, 2015
- Comparative Study of Using Nanoparticles for Enhanced Oil Recovery: Wettability Alteration of Carbonate RocksEnergy & Fuels, 2015
- Impact of Metal Oxide Nanoparticles on Enhanced Oil Recovery from Limestone Media at Several TemperaturesEnergy & Fuels, 2014
- The Application of Nanofluids for Enhanced Oil Recovery: Effects on Interfacial Tension and Coreflooding ProcessPetroleum Science and Technology, 2014
- A coreflood investigation of nanofluid enhanced oil recoveryJournal of Petroleum Science and Engineering, 2013
- Wettability Alteration of Sandstone Cores by Alumina-Based NanofluidsEnergy & Fuels, 2013
- Monitoring wettability alteration by silica nanoparticles during water flooding to heavy oils in five-spot systems: A pore-level investigationExperimental Thermal and Fluid Science, 2012
- Wettability Alteration in Carbonates using Zirconium Oxide Nanofluids: EOR ImplicationsEnergy & Fuels, 2012
- The wetting and spreading of nanofluids on solids: Role of the structural disjoining pressureCurrent Opinion in Colloid & Interface Science, 2011
- Spreading of nanofluids on solidsNature, 2003