Magnetic Force and Thermal Expansion as Failure Mechanisms of Electrothermal MEMS Actuators Under Electrostatic Discharge Testing
- 31 January 2007
- journal article
- Published by Wiley in Journal of Applied Mechanics
- Vol. 74 (5) , 996-1005
Abstract
Like microelectronic circuits, microelectromechanical systems (MEMS) devices are susceptible to damage by electrostatic discharge (ESD). At Sandia National Laboratories, polysilicon electrothermal MEMS actuators have been subjected to ESD pulses to examine that susceptibility. Failures, in the form of cracks at points of high stress concentration, occurred that could not be explained by thermal degradation of the polysilicon caused by excessive heating, or by excessive displacement of the legs of the actuator of the same nature that occur in normal operation. One hypothesis presented in this paper is that the internal magnetic forces between the legs of the actuator, resulting from the ESD-associated high current pulses, might produce vibrations of amplitude sufficient to produce these cracks. However, a dynamic analysis based on simple beam theory indicated that such cracks are unlikely to occur, except under rather extreme conditions. On the other hand, these same current pulses also cause resistive heating of the legs and, therefore, thermally induced compression that can lead to buckling. Buckling stresses, particularly when augmented by magnetic forces, can readily explain failure. Both the magnetic and thermal analyses were performed using the human body model and the machine model of ESD. A justification for ignoring shuttle motion and eddy currents induced in the substrate during the ESD pulse is presented, as well.Keywords
This publication has 8 references indexed in Scilit:
- Failure Analysis of Electrothermal Actuators Subjected to Electrical Overstress (EOS) and Electrostatic Discharge (ESD)2004
- Numerical Evaluation of Uniform Beam ModesJournal of Engineering Mechanics, 2003
- Modeling the thermal behavior of a surface-micromachined linear-displacement thermomechanical microactuatorSensors and Actuators A: Physical, 2002
- Interferometry of actuated microcantilevers to determine material properties and test structure nonidealities in MEMSJournal of Microelectromechanical Systems, 2001
- Bent-beam electrothermal actuators-Part I: Single beam and cascaded devicesJournal of Microelectromechanical Systems, 2001
- Bent-beam electrothermal actuators-Part II: Linear and rotary microenginesJournal of Microelectromechanical Systems, 2001
- Electrostatic discharge/electrical overstress susceptibility in MEMS: a new failure mode2000
- Precise determination of lattice parameter and thermal expansion coefficient of silicon between 300 and 1500 KJournal of Applied Physics, 1984