Effects of viscosity ratio and compatibilizers on the morphology and mechanical properties of polycarbonate/acrylonitrile‐butadiene‐styrene blends
Authors:
- 1 September 1999
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 39 (9) , 1667-1677
Abstract
A comprehensive experimental study was carried out to investigate the effects of (1) viscosity ratio, (2) temperature on the viscosity ratio, (3) extruder screw location, and (4) compatibilizers on the morphology of bisphenol‐A‐polycarbonate/acrylonitrile‐butadiene‐styrene (PC/ABS). Blends were prepared by utilizing a co‐rotating twin screw extruder and in‐situ morphology obtained via the screw pullout technique. A plot of the PC/ABS viscosity ratio, ηPC/ηABS, versus the shear rate showed a gradual rise in the curve up to a critical shear rate and thereafter displayed asymptotic character. Contrary to premise, ηPC/ηABS decreased with increasing temperature. This was elucidated by the melt viscosity of PC being thermally more sensitive than ABS over the temperature range investigated. As expected, the plot of the average domain size versus the viscosity ratio gave a concave up curve with a minimum when the viscosity ratio was close to unity. The morphology evolution along the screw of a twin screw extruder was examined. When sections of the kneading block were examined, the minor phase domains gradually showed reduction in size toward the extruder die, and the samllest domain was realized at the end of the block, namely, the flow impeding left‐handed screw element. Polymethylmethacrylate (PMMA) exhibited the greatest ABS domain size reduction, and annealed samples showed that it suppressed coalescence.Keywords
This publication has 18 references indexed in Scilit:
- Film drainage between droplets during theircoalescence in quiescent polymer blendsPolymer, 1998
- Effects of annealing in ABS ternary blendsJournal of Applied Polymer Science, 1997
- Polycarbonate/ABS blends: A literature reviewAdvances in Polymer Technology, 1994
- Estimation of sphere‐size distributions in two‐phase polymeric materials from transmission electron microscopy dataJournal of Applied Polymer Science, 1994
- Influence of a core/shell rubber phase on the morphology and the impact resistance of a PC/SAN blend (75/25)Polymer Engineering & Science, 1994
- Effect of melt annealing on the morphology and properties of polycarbonate blendsJournal of Applied Polymer Science, 1992
- Durable protection against long-wavelength UV-A radiation and blue lightArchives of Dermatology, 1992
- Formation of dispersed phase in incompatible polymer blends: Interfacial and rheological effectsPolymer Engineering & Science, 1987
- Polycarbonate blends with styrene/acrylonitrile copolymersJournal of Applied Polymer Science, 1984
- DISPERSION PHENOMENA IN HIGH VISCOSITY IMMISCIBLE FLUID SYSTEMS AND APPLICATION OF STATIC MIXERS AS DISPERSION DEVICES IN SUCH SYSTEMSChemical Engineering Communications, 1982