Multi-Function Microelectromechanical Systems Implementation with an ASIC Compatible CMOS 0.18 μm Process
Open Access
- 17 March 2021
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 12 (3) , 314
Abstract
A multi-function microelectromechanical system (MEMS) with a three-axis magnetometer (MAG) and three-axis accelerometer (ACC) function was implemented with an application-specific integrated circuit (ASIC)-compatible complementary metal-oxide-semiconductor (CMOS) 0.18 μm process. The readout circuit used the nested chopper, correlated double-sampling (CDS), noise reduction method; the frequency division multiplexing method; the time-division multiplexing method; and the calibration method. Sensing was performed by exciting the MEMS three-axis magnetometer at X/Y/Z axes mechanical resonant frequencies of 3.77/7.05/7.47 kHz, respectively. A modest die-level vacuum packaging resulted in in-plane and out-of-plane mechanical quality factors of 471–500 and 971–1000, respectively. The sensitivities of both the three-axis magnetometer with 2 mA driving current and the three-axis accelerometer were 7.1–10.7 uV/uT and 58.37–88.87 uV/ug. The resolutions of both the three-axis magnetometer with 2 mA driving current and three-axis accelerometer resolution were 44.06–87.46 nT/√Hz and 5.043–7.5 ng/√Hz. The resolution was limited by circuit noise equivalent acceleration (CNEM) and Brownian noise equivalent magnetic field (BNEM).Keywords
This publication has 14 references indexed in Scilit:
- Low-frequency noise reduction technique for accelerometer readout circuit2016
- Integrated Fluxgate Magnetometer for Use in Isolated Current SensingIEEE Journal of Solid-State Circuits, 2016
- Elastic coefficient analysis on planar S-shaped micro spring under high impact loadMicrosystem Technologies, 2015
- Area-Efficient Three Axis MEMS Lorentz Force MagnetometerIEEE Sensors Journal, 2013
- Development of multi-axes CMOS-MEMS resonant magnetic sensor using Lorentz and electromagnetic forces2013
- $Z$-Axis Magnetometers for MEMS Inertial Measurement Units Using an Industrial ProcessIEEE Transactions on Industrial Electronics, 2012
- Three-Axis Lorentz-Force Magnetic Sensor for Electronic Compass ApplicationsJournal of Microelectromechanical Systems, 2012
- Parametrically Amplified $Z$-Axis Lorentz Force MagnetometerJournal of Microelectromechanical Systems, 2011
- A monolithic CMOS MEMS accelerometer with chopper correlated double sampling readout circuit2011
- Design of low-noise CMOS MEMS accelerometer with techniques for thermal stability and stable DC biasing2010