Numerical Simulation of Vacuum Preloading for Reinforcing Soil inside Composite Bucket Foundation for Offshore Wind Turbines
Open Access
- 14 August 2019
- journal article
- research article
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 7 (8) , 273
Abstract
The composite bucket foundation (CBF) with seven honeycomb subdivisions is a new foundation for offshore wind turbine structures. The bearing capacity of CBF can be improved by consolidation of soil inside the CBF, which is caused by the vacuum preloading method after installation. A three-dimensional numerical model is established to simulate the consolidation process of soil for CBF with and without subdivisions in terms of vertical settlement, pore water pressure and void ratio of the soil. This analysis investigates the reinforcement effect of the two foundation types to assess the influence of the bulkheads. The results obtained show that there are obvious reinforcement effects for both foundation types. In the early stage of consolidation, vertical settlement is rapid, and this becomes stable with time. The depth at which the pore water pressure becomes negative is the depth showing the main reinforcement. Vacuum pressure decreases continuously with increase in soil depth and time. In addition, the excess pore water pressure in the soil dissipates, which turns into the soil effective stress. Bulkheads provide vertical drainage channels in the soil and shorten the seepage path, allowing the extraction of more pore water. This is conducive to the improvement of shallow soil, while also decreasing the extraction of pore water in deep soil and the region of the soil that can be reinforced.Keywords
Funding Information
- National Natural Science Foundation of China (51679163, 51779171)
- Innovation Method Fund of China (2016IM030100)
- Natural Science Foundation of Tianjin Municipal Science and Technology Commission (17JCYBJC22000)
This publication has 13 references indexed in Scilit:
- A pilot test on a membraneless vacuum preloading methodGeotextiles and Geomembranes, 2017
- Ground deformation induced by vacuum loading–unloadingEnvironmental Earth Sciences, 2016
- Field experiments on wet tows of an integrated transportation and installation vessel with two bucket foundations for offshore wind turbinesOcean Engineering, 2015
- Model tests on the bearing capacity of wide-shallow composite bucket foundations for offshore wind turbines in clayOcean Engineering, 2015
- A New Approach to Improve Soft Ground in a Railway Station Applying Air-Boosted Vacuum PreloadingGeotechnical Testing Journal, 2015
- Harmonization of new wind turbine rotor blades development process: A reviewRenewable and Sustainable Energy Reviews, 2014
- Motion analysis on integrated transportation technique for offshore wind turbinesJournal of Renewable and Sustainable Energy, 2013
- Calculation Method of Bearing Capacity Improvement of Soft Soil Foundation under Vacuum PreloadingApplied Mechanics and Materials, 2013
- One-step-installation of offshore wind turbine on large-scale bucket-top-bearing bucket foundationTransactions of Tianjin University, 2013
- Final state of soils under vacuum preloadingCanadian Geotechnical Journal, 2012