Phosphonic Acid-Derived Dual-Metal Passivation of Cu and Al for Corrosion-Resistant Wire-Bonded Interconnects
Authors:
- Shinoj Sridharan NairSNShinoj Sridharan Nair
- Dinesh Kumar KumaravelDKDinesh Kumar Kumaravel
- Pavan Singh AhluwaliaPAPavan Singh Ahluwalia
- Khanh Tuyet Anh TranKTKhanh Tuyet Anh Tran
- Duwage Anushka Sandaruwan PereraDPDuwage Anushka Sandaruwan Perera
- Shyam Muralidharan NairSNShyam Muralidharan Nair
- Oliver ChyanOCOliver Chyan
Open Access
Abstract
Copper–aluminum (Cu-Al) wire-bonded devices are widely used in microelectronic packaging; however, corrosion at exposed Cu-Al bimetallic interfaces can lead to Al pad degradation, undercutting, and eventual ball-bond lift-off or open-circuit failure under humid, halide-contaminated conditions. This work presents a scalable post-wire-bond wet-chemical passivation process using octadecylphosphonic acid (ODPA) to simultaneously modify exposed Cu/Pd-coated Cu (PCC) and Al surfaces. The passivation process includes a hydroxylation pretreatment to generate reactive oxide/hydroxide surface sites, followed by ODPA treatment and solvent rinsing to remove weakly adsorbed species. Surface modification was evaluated using contact-angle measurements, reflection–absorption infrared spectroscopy (RAIRS), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS). ODPA treatment increased the water contact angle on Cu and Al, confirming a substantial increase in surface hydrophobicity following coating formation. RAIRS identified ODPA-associated aliphatic C-H bands, AFM showed treatment-induced nanoscale surface changes, and XPS supported metal–oxygen–phosphorus interfacial bonding. Under aggressive 100 ppm chloride-ion immersion, ODPA passivation strongly suppressed corrosion-induced ball-bond lift-off across both device platforms. Lift-off decreased from 99.0% to 0.73% for Cu-Al devices and from 23.3% to 0.42% for PCC-Al devices. Collectively, these findings establish an effective, process-compatible post-wire-bond strategy for substantially protecting corrosion-susceptible interfaces and thereby improving the reliability of wire-bonded interconnects in halide-containing environments.Keywords
This publication has 40 references indexed in Scilit:
- Aqueous phosphonic acid treatments of aluminium: Effect of oxide dissolution and re-oxidation on adsorbate formationApplied Surface Science, 2024
- Thermal stability and protective properties of phenylphosphonic acid on Cu(111)Applied Surface Science, 2022
- Accelerated reliability testing of Cu-Al bimetallic contact by a micropattern corrosion testing platform for wire bond device applicationMethodsX, 2021
- The nature of self-assembled octadecylphosphonic acid (ODPA) layers on copper substratesJournal of Colloid and Interface Science, 2021
- Corrosion-induced degradation and its mechanism study of Cu–Al interface for Cu-wire bonding under HAST conditionsJournal of Alloys and Compounds, 2020
- Covalent Surface Modification of Oxide SurfacesAngewandte Chemie International Edition, 2014
- Mechanism of aluminum hydroxide layer formation by surface modification of aluminumApplied Surface Science, 2010
- Galvanic corrosion of aluminium–copper model alloysElectrochimica Acta, 2007
- Infrared Spectra of Alkylphosphonic Acid Bound to Aluminium SurfacesMacromolecular Symposia, 2007
- Characterization of the adsorption of ?-(thiophene-3-yl alkyl) phosphonic acid on metal oxides with AR-XPSAnalytical and Bioanalytical Chemistry, 2004