Abstract
Purpose of the study: to analyze common geometric confi gurations of existing metal grain silo structures, followed by the development of an analytical model of the structure and determination of the ratio of its geometric parameters to minimize material costs while maintaining a constant useful volume by solving the problem using methods of differential calculus of functions of several variables Methods – the study uses a set of theoretical and analytical methods aimed at substantiating the optimal geometric parameters of metal grain silos: analysis and synthesis of technical information; comparative analysis of structures from different manufacturers; methods of differential calculus of functions of several variables; Lagrange multiplier method; geometric modelling of silo elements; graph analytical method; elemental analysis of the material intensity of the structure; statistical analysis of practical data from manufacturers. Results. The analysis showed that the most common and technically feasible design is a silo with a cylindrical body and conical elements. Based on analytical modelling, a relationship between the height and radius of the cylindrical part was obtained, which minimizes the surface area of the structure and is determined by the sum of the secants of the roof and bottom angles. Modelling demonstrated the possibility of reducing material costs by 8-12% compared to typical industrial structures. A comparison with real silos showed that their parameters are close to optimal (deviation ≤ 10%). Conclusions. The results confi rm that optimized silo models, whose size deviations satisfy the condition ≤ 10%, are available on the elevator equipment market. However, the number of MGS models whose size ratios exceed the deviation limits prevails. This is due to the fact that manufacturers neglect optimality for other purposes: versatility of application (fi xed height of rings, standardization of modules), functional requirements (availability of high support for equipment, fast unloading), market conditions (focus on farms with specifi c requirements). The results of the modelling allow for a reduction in structural material costs of 8-12% compared to actual silo designs and can be used in the design of energy-effi cient grain storage facilities. The practical signifi cance of the results obtained lies in establishing a theoretical relationship, which, when taken into account during the design of silos by elevator equipment manufacturers, is aimed at saving material and reducing capital costs. The conclusions of the study can be implemented as an example of mathematical optimization in engineering in the educational process.