IMPACT OF ELEVATED TEMPERATURE ON THE PROPERTIES OF CONCRETES REINFORCED WITH ALFA FIBER
Authors:
Open Access
- 1 September 2020
- journal article
- research article
- Published by University of Zielona Góra, Poland in Civil and Environmental Engineering Reports
- Vol. 30 (3) , 161-185
Abstract
Alfa fiber reinforced concretes are not used to their full potential due to the limited information on their properties, especially in more severe environments. In this study, the effects of elevated temperature on the properties of concretes reinforced with Alfa fiber were analyzed. The influence of fiber length on reinforced concretes is mainly investigated. For this purpose, five types of structural concretes were formulated; two types of concrete reinforced with 1% Alfa fiber volume using two different fiber lengths of 20 mm and 30 mm (AC-20, and AC-30), and three control concretes, two polypropylene fiber reinforced concretes (PC) using the same fiber length (PC-20, PC-30), and one ordinary concrete (OC). The results showed that with the increase of temperature, the mechanical performance decreased and the porosity rose continually for all mixtures. However, the use of Alfa fiber with a length of 20 mm showed the optimal results in terms of compressive and tensile strength, even at temperatures of 600 degrees C. This finding suggests that Alfa vegetable fiber can be used to produce more sustainable concretes with acceptable mechanical properties compared to the use of polypropylene fiber, even under severe conditions of elevated temperature.Keywords
This publication has 29 references indexed in Scilit:
- Is alfa a vegetal fiber suitable for making green reinforced structure concrete?European Journal of Environmental and Civil Engineering, 2016
- Evaluation of mechanical properties of steel-fibre-reinforced concrete exposed to high temperatures by double-punch testConstruction and Building Materials, 2015
- Experimental research for the effect of high temperature on the mechanical properties of steel fiber-reinforced concreteConstruction and Building Materials, 2015
- Degradation kinetics and aging mechanisms on sisal fiber cement composite systemsCement and Concrete Composites, 2013
- Experimental investigations on bond strength between coconut fibre and concreteMaterials & Design (1980-2015), 2013
- Use of cellulose fibers from hemp core in fiber-cement production. Effect on flocculation, retention, drainage and product propertiesIndustrial Crops and Products, 2012
- Fiber-matrix interactions in cement mortar composites reinforced with cellulosic fibersCellulose, 2011
- Influence of fibre orientation and volume fraction on the tensile properties of unidirectional Alfa-polyester compositeComposites Science and Technology, 2007
- The thermal and crystallisation studies of short sisal fibre reinforced polypropylene compositesComposites Part A: Applied Science and Manufacturing, 2003
- Physicochemical, mineralogical, and morphological characteristics of concrete exposed to elevated temperaturesCement and Concrete Research, 2002