Hot Deformation Behaviour of Mn–Cr–Mo Low-Alloy Steel in Various Phase Regions
Open Access
Abstract
The deformation behaviour of a coarse-grained as-cast medium-carbon steel, alloyed with 1.2% Mn, 0.8% Cr and 0.2% Mo, was studied by uniaxial compression tests for the strain rates of 0.02 s−1–20 s−1 in the unusually wide range of temperatures (650–1280 °C), i.e., in various phase regions including the region with predominant bainite content (up to the temperature of 757 °C). At temperatures above 820 °C, the structure was fully austenitic. The hot deformation activation energies of 648 kJ·mol−1 and 364 kJ·mol−1 have been calculated for the temperatures ≤770 °C and ≥770 °C, respectively. This corresponds to the significant increase of flow stress in the low-temperature bainitic region. Unique information on the hot deformation behaviour of bainite was obtained. The shape of the stress-strain curves was influenced by the dynamic recrystallization of ferrite or austenite. Dynamically recrystallized austenitic grains were strongly coarsened with decreasing strain rate and growing temperature. For the austenitic region, the relationship between the peak strain and the Zener–Hollomon parameter has been derived, and the phenomenological constitutive model describing the flow stress depending on temperature, true strain rate and true strain was developed. The model can be used to predict the forming forces in the seamless tubes production of the given steel.Keywords
This publication has 75 references indexed in Scilit:
- Characteristics of Plasticity and Microstructure of Hot Forming Magnesium Alloys Mg-Al-Zn Type / Charakterystyki Plastycznosci I Mikrostruktura Odkształcanych Na Goraco Stopów Magnezu Typu Mg-Al-ZnArchives of Metallurgy and Materials, 2013
- Constitutive modeling for hot deformation behavior of T24 ferritic steelComputational Materials Science, 2012
- Prediction of hot compression flow curves of Ti–6Al–4V alloy in α+β phase regionMaterials & Design (1980-2015), 2011
- Study of the hot deformation behaviour in Ti–5Al–5Mo–5V–3Cr–1ZrMaterials Science and Engineering: A, 2011
- Complex Flow Stress Model for a Magnesium Alloy AZ31 at Hot FormingHigh Temperature Materials and Processes, 2011
- Extrapolation of flow curves at hot working conditionsMaterials Science and Engineering: A, 2010
- Flow stress prediction at hot working conditionsMaterials Science and Engineering: A, 2010
- Activated slip systems and microcrack path in LCF of a duplex stainless steelMaterials Science and Engineering: A, 2009
- Mathematical modelling of the stress–strain curves of Ti-IF steel at high temperatureJournal of Materials Processing Technology, 2006
- New formula for calculating flow curves from high temperature constitutive data for 300 austenitic steelsJournal of Materials Processing Technology, 1992