Effect of surface‐modifying macromolecules and membrane morphology on fouling of polyethersulfone ultrafiltration membranes
Authors:
- 16 April 2003
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 88 (14) , 3132-3138
Abstract
Polyethersulfone (PES) ultrafiltration (UF) membranes with and without surface‐modifying macromolecules (SMMs) were prepared and characterized in terms of the mean pore size and pore‐size distribution, surface porosity, and pore density. The results demonstrated that both the mean pore size and the molecular weight cutoff (MWCO) of the SMM‐modified membranes are lower than those of the corresponding unmodified ones. Membrane fouling tests with humic acid as the foulant indicated that the permeate flux reduction of the SMM‐modified membranes was much less than that of the unmodified ones. Therefore, fouling was more severe for the unmodified membranes. Moreover, the dry weight of the humic acid deposited on the membrane surface was considerably higher for the unmodified membranes. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 3132–3138, 2003Keywords
This publication has 6 references indexed in Scilit:
- Membrane characterization by solute transport and atomic force microscopyJournal of Membrane Science, 1998
- XPS and SIMS characterisation of segmented polyether polyurethanes containing two different soft segmentsPolymer, 1998
- Chemical and physical aspects of natural organic matter (NOM) fouling of nanofiltration membranesJournal of Membrane Science, 1997
- Development of membranes with low surface energy to reduce the fouling in ultrafiltration applicationsJournal of Membrane Science, 1997
- An appropriate molecular size parameter for porous membranes calibrationJournal of Membrane Science, 1995
- Critical flux concept for microfiltration foulingJournal of Membrane Science, 1995