Review and Comparison of Fracture Mechanics-based Bond Strength Models for FRP-strengthened Structures
- 1 November 2006
- journal article
- review article
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 25 (17) , 1757-1794
Abstract
This study presents a critical review on fracture mechanics-based bond strength models related to the use of externally bonded fiber reinforced polymer (FRP) composites in the rehabilitation of concrete. The predictions from a set of typically used bond strength models are compared with each other through a set of parametric studies. Given that the models use a diverse set of parameters, in order to enable an equitable comparison, parameters are carefully chosen as related to (a) characteristics of concrete, (b) characteristics of the FRP, and (c) characteristics related to concrete cover and epoxy mortar. The corresponding reliability and accuracy is also confirmed by comparing with test data. A comparison of some of the major models in this class with experimental data shows that the accuracy in prediction of Pmax and Le varies substantially with very few of the models actually incorporating the effects of critical bond parameters such as adhesive thickness and characteristics of the FRP–concrete interphase. Furthermore, the direct application of the results of these models into a sectional analysis provides an underestimation of the capacity of FRP-rehabilitated RC beams, with the exception of the ACI-440 approach which in most cases overpredicts results indicating its non-conservative nature. The use of procedures recommended in ACI-440 and as proposed herein are shown to provide a more accurate description, with the latter providing a means of determining the mode of failure through incorporation of the energetics of fracture interaction between cracking in concrete and redistribution of forces to the FRP. Critical aspects still needing study are also identified.Keywords
This publication has 9 references indexed in Scilit:
- Numerical Analysis of Debonding Mechanisms in FRP-Strengthened RC BeamsComputer-Aided Civil and Infrastructure Engineering, 2005
- Effect of beam size and FRP thickness on interfacial shear stress concentration and failure mode of FRP-strengthened beamsComposites Science and Technology, 2005
- Intermediate crack-induced debonding in RC beams and slabsConstruction and Building Materials, 2003
- Stress Transfer and Fracture Propagation in Different Kinds of Adhesive JointsJournal of Engineering Mechanics, 2002
- Anchorage Strength Models for FRP and Steel Plates Bonded to ConcreteJournal of Structural Engineering, 2001
- Transfer Lengths and Bond Strengths for Composites Bonded to ConcreteJournal of Composites for Construction, 1999
- Strengthening of reinforced concrete structures1999
- Strengthening of concrete prisms using the plate-bonding techniqueInternational Journal of Fracture, 1996
- A numerical approach to the complete stress-strain curve of concreteCement and Concrete Research, 1973