A comparative study on laminated and randomly oriented Luffa-Kevlar Reinforced hybrid composites
Authors:
- 13 December 2017
- journal article
- research article
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 16 (2) , 237-244
Abstract
In this article, an investigation has been carried out to hybridize Luffa (L) and Kevlar (K) for the first instant. Three laminated and three randomly oriented samples were fabricated with LL, LK, and KK combination. The fabricated samples were characterized using void fraction, water absorption, density, tensile, and flexural test. The surface morphology of fragmented specimens is examined using scanning electron microscope. The tensile strength of LK laminate was lower than the KK laminate, but with a decrease in both strength and associated cost, hybridization can be accepted. This study provides valuable information to designers for hybridizing Luffa and Kevlar together and subsequently reduced the production cost.Keywords
This publication has 9 references indexed in Scilit:
- Fiber surface treatment: Its effect on structural, thermal, and mechanical properties of Luffa cylindrica fiber and its compositeJournal of Composite Materials, 2016
- Effect of fibre orientations on the mechanical properties of kenaf–aramid hybrid composites for spall-liner applicationDefence Technology, 2016
- Measurement of ballistic impact properties of woven kenaf–aramid hybrid compositesMeasurement, 2016
- Cellulosic/synthetic fibre reinforced polymer hybrid composites: A reviewCarbohydrate Polymers, 2011
- Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A ReviewJournal of Polymers and the Environment, 2007
- The effect of fiber surface treatments on the tensile and water sorption properties of polypropylene–luffa fiber compositesComposites Part A: Applied Science and Manufacturing, 2006
- Aspects of alkali treatment of sponge gourd (Luffa cylindrica) fibers on the flexural properties of polyester matrix compositesJournal of Applied Polymer Science, 2003
- Relationship between structure and mechanical properties for aramid fibresJournal of Materials Science, 1992
- Strain birefringence of Kevlar aramid fibersJournal of Applied Polymer Science, 1987