Stress Analysis and Determination of Bolt Preload in Pipe Flange Connections With Gaskets Under Internal Pressure
Authors:
- 1 November 2002
- journal article
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 124 (4) , 385-396
Abstract
The stresses of a pipe flange connection with a spiral-wound gasket under internal pressure are analyzed taking account a nonlinearity and a hysteresis of the gasket by using an axisymmetric theory of elasticity and the finite element method (FEM). The leakage tests were also conducted using an actual pipe flange connection with a spiral-wound gasket. Using the contact stress distribution of the pipe flange connection with 3-in. nominal diameter under internal pressure and the tightness parameter, the values of the new gasket constants are obtained by taking into account the changes in the contact stress. A difference in the new gasket constants between the estimated values obtained from the actual pipe flange connection and the values obtained by the PVRC procedure is small. In addition, a method to determine the bolt preload for a given tightness parameter is demonstrated. The obtained results of the bolt preload for the pipe flange connection are in a fairly good agreement with those obtained by the PVRC procedure under a lower pressure application. However, a difference in the bolt preload is about 10% when an internal pressure is increased.Keywords
This publication has 8 references indexed in Scilit:
- On the Characteristics of Rectangular Bolted Flanged Connections With Gaskets Subjected to External Tensile Loads and Bending MomentsJournal of Pressure Vessel Technology, 1994
- Mechanical Behavior of Bolted Joints Under Steady Heat ConductionJournal of Pressure Vessel Technology, 1994
- A Stress Analysis of Pipe Flange ConnectionsJournal of Pressure Vessel Technology, 1991
- AN OVER VIEW OF THE US PVRC RESEARCH PROGRAM ON BOLTED FLANGED CONNECTIONS1989
- A Simple Method to Calculate the Force Ratio of Bolted Joints : The case where clamped parts are circular flanges and pipe flangesBulletin of JSME, 1983
- On the Deformation of the Bolt Head and Nut in a Bolted JointBulletin of JSME, 1976
- Closure to “Discussion of ‘Axisymmetric, Nonidentical, Flat Face Flanges With Metal-to-Metal Contact Beyond the Bolt Circle’” (1969, ASME J. Eng. Ind., 91, pp. 621–622)Journal of Engineering for Industry, 1969
- Axisymmetric, Nonidentical, Flat Face Flanges With Metal-to-Metal Contact Beyond the Bolt CircleJournal of Engineering for Industry, 1969