Impact of Blending on Strength Distribution of Ambient Cured Metakaolin and Palm Oil Fuel Ash Based Geopolymer Mortar
Open Access
- 31 August 2014
- journal article
- research article
- Published by Wiley in Advances in Civil Engineering
- Vol. 2014, 1-8
Abstract
This paper investigates the influence of blending of metakaolin with silica rich palm oil fuel ash (POFA) on the strength distribution of geopolymer mortar. The broadness of strength distribution of quasi-brittle to brittle materials depends strongly on the existence of flaws such as voids, microcracks, and impurities in the material. Blending of materials containing alumina and silica with the objective of improving the performance of geopolymer makes comprehensive characterization necessary. The Weibull distribution is used to study the strength distribution and the reliability of geopolymer mortar specimens prepared from 100% metakaolin, 50% and 70% palm and cured under ambient condition. Mortar prisms and cubes were used to test the materials in flexure and compression, respectively, at 28 days and the results were analyzed using Weibull distribution. In flexure, Weibull modulus increased with POFA replacement, indicating reduced broadness of strength distribution from an increased homogeneity of the material. Modulus, however, decreased with increase in replacement of POFA in the specimens tested under compression. It is concluded that Weibull distribution is suitable for analyses of the blended geopolymer system. While porous microstructure is mainly responsible for flexural failure, heterogeneity of reaction relics is responsible for the compression failure.Keywords
Funding Information
- Universiti Teknologi Malaysia (03H35)
This publication has 24 references indexed in Scilit:
- The effect of water to cement ratio on fracture parameters and brittleness of self-compacting concreteMaterials & Design (1980-2015), 2013
- Evaluation of flexural strength of hipped and presintered zirconia using different estimation methods of Weibull statisticsJournal of the Mechanical Behavior of Biomedical Materials, 2012
- Reliable onset time determination and source location of acoustic emissions in concrete structuresCement and Concrete Composites, 2012
- A practical and systematic review of Weibull statistics for reporting strengths of dental materialsDental Materials, 2010
- Gradient and fracture energy-based plasticity theory for quasi-brittle materials like concreteComputer Methods in Applied Mechanics and Engineering, 2009
- Is Weibull distribution the most appropriate statistical strength distribution for brittle materials?Ceramics International, 2009
- Fracture statistics of ceramics – Weibull statistics and deviations from Weibull statisticsEngineering Fracture Mechanics, 2007
- On the use of the Weibull and the normal cumulative probability models in structural designMaterials & Design (1980-2015), 2007
- Comparison of Weibull and normal distributions for concrete compressive strengthsCanadian Journal of Civil Engineering, 2006
- Reliability-based design of ceramicsMaterials & Design (1980-2015), 1994